Airbag control unit with part number 95910-2W180

What does the airbag control unit 95910-2W180 do?

The airbag control unit 95910-2W180 controls the restraint system (SRS) for Hyundai. It checks the crash sensors and decides in an accident which airbags and seatbelt pretensioners are triggered.

In addition, it monitors all components of the system continuously. If it discovers a fault, it shows this via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-2W180 fail?

The most common cause is crash data from an accident, even if no airbag was triggered. In addition there are aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

These crash data cannot be erased with an ordinary diagnostic tool. Airbag24 erases them during the repair.

The other causes mainly include:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example with a weak battery or a jump start

How can you tell that the 95910-2W180 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently as soon as something is wrong with the 95910-2W180. A fault message in the instrument cluster, a missing connection of the diagnostic tool or a fault memory that cannot be cleared also point to this.

A fault memory that cannot be cleared is another sign of a problem with the unit. As long as the finding persists, airbags and seatbelt pretensioners may fail to trigger in an emergency.

You should therefore take the warning seriously and have it clarified promptly.

Which vehicles is the 95910-2W180 fitted in?

The 95910-2W180 is fitted in these vehicles: Hyundai Santa Fe DM (2012-2015) and DM Facelift (2015-2018).

This list shows the vehicles of the assignment:

• Hyundai Santa Fe DM (2012-2015)
• Hyundai Santa Fe DM Facelift (2015-2018)

Comparing the part number on the label of the removed unit with this page only ensures that it is the right unit. Read out the fault memory beforehand, because the result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95700-2B110, 95910-0W100, 95910-26100, 95910-2B028, 95910-2B900, 95910-2B970.

How does the repair of the 95910-2W180 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in; at Airbag24, checking, repairing and testing usually take 3–4 working days.

At Airbag24, the unit is checked on the test bench, defective components are replaced, the crash data is erased and a function test is carried out. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2W180 get to Airbag24?

You send the control unit 95910-2W180 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns the unit by UPS.

Enclose the printed repair order with the parcel and pack the unit shockproof.