Airbag control unit with part number 95910-2W960

What does the airbag control unit 95910-2W960 do?

The airbag control unit 95910-2W960 coordinates the restraint system (SRS) of Hyundai. It processes the measured values from the crash sensors, determines within milliseconds in an impact which airbags and seatbelt pretensioners trigger, and checks the system continuously for faults.

Detected faults are reported via the airbag warning light. After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-2W960 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Other causes are aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example with a weak battery or jump start.

A unit with crash data may appear inconspicuous in everyday use. The data is nevertheless present and must be removed during the repair.

The other causes can only be confirmed or ruled out by a precise examination.

How can you tell that the 95910-2W960 is defective?

The airbag warning light in the instrument cluster lights up continuously or intermittently. Typical signs are also an error message in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared.

The warning light is the direct indication that the system has detected a fault. If the unit is defective, airbags and seatbelt pretensioners may possibly not trigger in an emergency. Therefore have the warning checked promptly.

Which vehicles is the 95910-2W960 fitted in?

The 95910-2W960 is fitted in these vehicles: Hyundai Santa Fe DM (2012-2015) and DM Facelift (2015-2018).

The assignment for this part number lists the following vehicles:

• Hyundai Santa Fe DM (2012-2015)
• Hyundai Santa Fe DM Facelift (2015-2018)

Compare the part number on the label of the removed unit with this page. This only ensures that you have the correct unit in front of you. Have the fault memory read out beforehand, because the result shows whether the control unit or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95700-2B110, 95910-0W100, 95910-26100, 95910-2B028, 95910-2B900, 95910-2B970.

How does the repair of the 95910-2W960 work?

You first read out the fault memory and enclose the log. Then you disconnect the battery and remove the control unit afterwards. In the next step you create the repair order online and pack the unit well before sending it in.

Airbag24 tests the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Processing usually takes 3–4 working days. Afterwards the own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2W960 get to Airbag24?

You send the 95910-2W960 as a parcel to us, or you book a UPS collection for an extra charge. After the repair the unit goes back to you by UPS.

The printed repair order belongs in the parcel, and the unit should be packed shockproof.