Airbag control unit with part number 95910-2Y000

What does the airbag control unit 95910-2Y000 do?

The airbag control unit 95910-2Y000 is the central control unit of the restraint system (SRS) of Hyundai. It processes the signals from the crash sensors and decides in a collision which airbags and seatbelt pretensioners are triggered.

Even outside an accident, the unit operates continuously. It monitors the system and reports faults via the airbag warning light.

After an accident, it stores crash data and locks itself.

Why does the control unit 95910-2Y000 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it, and during the repair Airbag24 removes it. Further causes are ageing electronics, cold solder joints, moisture at plug connections, and voltage spikes.

The crash data is therefore a cause that cannot be fixed without a special measure. It can remain in the unit even if the airbag was not triggered in the accident.

The other causes may stem from ageing, moisture and electrical loads. The examination shows which of them applies in the individual case.

How can you tell that the 95910-2Y000 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently, a fault message appears, the diagnostic tool does not get a connection to the control unit, and the fault memory cannot be cleared.

In a defect, airbags and seatbelt pretensioners may fail to trigger when it matters. For this reason, the vehicle should be checked promptly if these signs appear.

Which vehicles is the 95910-2Y000 fitted in?

The control unit 95910-2Y000 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The list contains the vehicles that Airbag24 has stored for this part number.

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Comparing the part number on the label of the removed unit with this page only ensures that it is the correct unit. Whether the control unit is defective, or a plug or cable is the cause, is shown only by the fault memory, so have it read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Y000 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a function test. Afterwards your own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Y000 get to Airbag24?

You send the control unit as a parcel, or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Enclose the printed repair order and pack the unit shockproof.