Airbag control unit with part number 95910-2Y150

What does the airbag control unit 95910-2Y150 do?

The airbag control unit 95910-2Y150 brings together the restraint system (SRS) in Hyundai. It reads the signals of the crash sensors, determines the triggering of airbags and seatbelt pretensioners in a crash, and checks the system constantly.

If the unit detects a fault, the airbag warning light in the instrument cluster comes on. After an accident, it stores crash data and locks itself.

This check runs in the background, and the warning light is its visible part.

Why does the control unit 95910-2Y150 fail?

For 95910-2Y150, stored crash data is the most common cause, and this applies even if no airbag has deployed. Further causes are aged electronics, moisture and corrosion at plug connections, cold solder joints and voltage spikes.

A normal diagnostic tool does not remove the crash data from memory. Airbag24 erases it during the repair.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump-start

How can you tell that the 95910-2Y150 is defective?

A defect in the 95910-2Y150 shows itself through the airbag warning light, which comes on permanently or intermittently, and through a fault message in the instrument cluster. In addition, the diagnostic tool has no connection to the control unit, and the fault memory cannot be cleared.

The warning light in the instrument cluster is therefore the most important signal. It shows that the system has detected a fault, regardless of how the vehicle behaves in everyday use.

In an emergency, airbags and seatbelt pretensioners may fail to deploy in the event of such a defect. Have the vehicle checked promptly.

Which vehicles is the 95910-2Y150 fitted in?

The control unit 95910-2Y150 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015). This selection serves as a guide before you remove the unit.

The vehicles assigned to it are listed one below the other here:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Compare the part number on the label of the removed unit with this page. This only ensures that you have the correct unit in front of you. Have the fault memory read out beforehand: only it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Y150 work?

For the repair of the 95910-2Y150, first have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit and create the repair order online. Processing at Airbag24 usually takes 3–4 working days.

Pack the unit well so that it arrives undamaged. At Airbag24, it is checked on the test bench, defective components are replaced, the crash data is erased and a function test is carried out.

After that, your unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Y150 get to Airbag24?

You send the control unit 95910-2Y150 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Enclose the printed repair order with the parcel, and pack the unit shock-proof.