Airbag control unit with part number 95910-2Y250

What does the airbag control unit 95910-2Y250 do?

The airbag control unit 95910-2Y250 is the restraint system (SRS) control unit of Hyundai. In an accident it evaluates the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners are triggered.

The unit also checks the system when no accident has occurred. It indicates detected faults via the airbag warning light.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-2Y250 fail?

The most common cause is crash data stored after an accident, even without a triggered airbag. Other causes lie in the electronics or at the contacts.

Crash data remains in the unit, because a normal diagnostic tool cannot erase it. Airbag24 removes it during the repair.

Further causes are aged electronic components, cold solder joints, and moisture and corrosion at the plug connections. Voltage spikes, for example from a weak battery or a jump-start, can also affect the unit.

How can you tell that the 95910-2Y250 is defective?

The airbag warning light in the instrument cluster is on permanently or intermittently. The diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared. In such a case, airbags and seatbelt pretensioners may not deploy in an emergency.

The warning light points directly to the defect. An error message in the instrument cluster may come on as well and confirm the finding.

Which vehicles is the 95910-2Y250 fitted in?

The control unit 95910-2Y250 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

These models are recorded for the part number. Check your vehicle against the list:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

On the one hand, compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. On the other hand, have the fault memory read out before removal. Only this shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Y250 work?

Processing at Airbag24 usually takes 3–4 working days. First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit. Afterwards create a repair order online and send the unit in well packed.

Airbag24 tests the submitted unit on the test bench, replaces defective components and erases the stored crash data. A function test concludes the work, and then your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Y250 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair it comes back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-resistant.