Airbag control unit with part number 95910-2Y300

What does the airbag control unit 95910-2Y300 do?

The airbag control unit 95910-2Y300 coordinates the restraint system (SRS) in Hyundai. It evaluates the signals from the crash sensors, determines in an accident within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the system continuously.

The unit indicates faults via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and locks itself.

Why does the control unit 95910-2Y300 fail?

The most common cause is crash data stored after an accident, even without a triggered airbag. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a normal diagnostic tool; Airbag24 erases it during the repair.

The other causes relate to electronics, connections and the power supply and develop over a longer period.

Voltage spikes, for example from jump-starting or a weak battery, place additional strain on the electronics.

How can you tell that the 95910-2Y300 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message also appears in the instrument cluster. The diagnostic tool does not connect to the control unit, and the fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then not trigger.

Therefore have the finding checked without delay.

Which vehicles is the 95910-2Y300 fitted in?

The 95910-2Y300 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The list shows the vehicles recorded for this part number.

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

(a) Compare the part number on the label of the removed unit with this page, so that you know for certain you have the right unit. (b) Have the fault memory read out before removal. The log alone shows whether the control unit itself is the cause or whether a plug or cable is.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Y300 work?

First have the fault memory read out and attach the log; then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit off well packed. At Airbag24, testing, repair and the function test usually take 3–4 working days.

The sequence is mandatory for safety reasons.

Airbag24 tests the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. After that, your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Y300 get to Airbag24?

You send the control unit 95910-2Y300 to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

You put the printed repair order in the parcel and pack the unit shock-proof.