Airbag control unit with part number 95910-2Z100

What does the airbag control unit 95910-2Z100 do?

The airbag control unit 95910-2Z100 coordinates the restraint system (SRS) in the Hyundai vehicle. It reads the crash sensors and calculates in an emergency, in a fraction of a second, which airbags and seatbelt pretensioners to trigger, and checks the entire system continuously.

If the unit detects a fault, it switches on the airbag warning light in the instrument cluster. This lets you notice a fault without a workshop test.

After an accident the unit stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-2Z100 fail?

Stored crash data is the most common cause: it remains in the control unit after an accident, even without a deployed airbag, and an ordinary diagnostic tool cannot erase it. Added to this are aged components, cold solder joints, moisture with corrosion at plug connections, and voltage spikes.

Ageing and solder joints deteriorate slowly, and a fault only becomes noticeable once a contact really gives way. Voltage spikes occur suddenly, for example with a weak battery or when jump-starting.

Whether a unit suffers from any of these points only becomes clear during the test on the test bench. The fault memory always comes first before the repair, because it provides the clue to the cause.

How can you tell that the 95910-2Z100 is defective?

Typical signs are an airbag warning light in the instrument cluster that stays on permanently or intermittently, a fault message in the instrument cluster, a diagnostic tool without a connection to the control unit, and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then possibly not deploy.

• warning light stays on permanently or intermittently
• message in the instrument cluster about the airbag system
• diagnostic tool cannot establish a connection to the control unit
• fault memory remains despite an attempt to clear it

As soon as the light is visible, a test makes sense. The warning light is the signal you should react to.

Which vehicles is the 95910-2Z100 fitted in?

With us, this part number is assigned to vehicles. The control unit 95910-2Z100 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The list shows the assignment as it is held with us.

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Compare the part number on the label of the removed unit with this page; that only confirms that it is the correct unit. Also have the fault memory read out beforehand, because this log shows whether the control unit itself is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Z100 work?

First read out the fault memory and attach the log. Then disconnect the battery, remove the control unit and create a repair order online. Airbag24 checks the well-packed unit, replaces defective components, deletes the crash data and runs a function test. Processing usually takes 3–4 working days.

This period covers only checking, repairing and testing. After that, the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Z100 get to Airbag24?

You can send the control unit 95910-2Z100 in as a parcel or have it collected by UPS for an extra charge. Airbag24 returns it to you by UPS after the repair.

Place the printed repair order in the parcel. Make sure the unit is packed shockproof before you hand it over.