Airbag control unit with part number 95910-2Z200

What does the airbag control unit 95910-2Z200 do?

The airbag control unit 95910-2Z200 coordinates the restraint system (SRS) at Hyundai. It checks the sensor signals continuously and triggers the airbags and seatbelt pretensioners in an accident.

If it has detected a fault, it reports it via the airbag warning light. The evaluation of the crash sensors runs constantly in the background.

After an accident, the control unit stores crash data and locks itself. In addition, it carries the identifier that is used for assignment when you send it in.

Why does the control unit 95910-2Z200 fail?

Stored crash data after an accident is the most common cause, even if no airbag has fired. Ordinary diagnostic tools cannot erase it; in addition there are aged electronics, cold solder joints, moisture and corrosion on plugs, and voltage spikes.

Crash data remains in memory after an accident, even if no airbag fired. A normal diagnostic tool cannot erase it, so the fault persists.

The remaining causes lie more in the technology. Aged electronic components and cold solder joints belong to them, as do moisture and corrosion at plug connections. Voltage spikes, for example from a weak battery or jump-starting, round off the picture.

How can you tell that the 95910-2Z200 is defective?

A defect in the 95910-2Z200 shows through the airbag warning light in the instrument cluster, through an error message, or through a diagnostic tool that cannot establish a connection. In a real emergency, airbags and seatbelt pretensioners may then fail to deploy.

A fault memory that cannot be erased also counts among the signs. The warning light is the indicator through which the system itself signals faults.

If the warning light does not go out, have the vehicle checked promptly.

Which vehicles is the 95910-2Z200 fitted in?

The 95910-2Z200 is installed in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The associated vehicles can be found in this overview:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

If you compare the part number on the label with this page, you know you have the matching unit. That alone does not say whether it is defective. So have the fault memory read out beforehand, because only this log shows whether the control unit is the cause or whether a plug or a cable is.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Z200 work?

You have the fault memory of the 95910-2Z200 read out first, and the log goes into the parcel with it. Then you disconnect the battery, remove the control unit, create the repair order online and send the unit off packed.

Afterwards, Airbag24 checks the unit on the test bench, repairs defective components, deletes the crash data and carries out a functional test. Processing usually takes 3–4 working days, after which the return shipment follows.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Z200 get to Airbag24?

The route to Airbag24 runs either via a parcel that you send yourself or via a UPS collection that you book for an additional charge. After the repair, Airbag24 returns the unit via UPS.

Shock-proof packaging and the printed repair order in the parcel are all that is needed.