Airbag control unit with part number 95910-2Z500

What does the airbag control unit 95910-2Z500 do?

The airbag control unit 95910-2Z500 belongs to the restraint system (SRS) in Hyundai and coordinates it. The signals from the crash sensors are evaluated, and in an impact the unit decides within milliseconds on airbags and seatbelt pretensioners. It reports faults via the airbag warning light.

The system is checked continuously during operation, and deviations are stored in the fault memory. If an accident has occurred, the control unit creates crash data and locks itself.

This combination of measuring, evaluating and self-checking makes the unit the central component of the safety technology.

Why does the control unit 95910-2Z500 fail?

The most common trigger is crash data after an accident, even without an airbag deployment; a normal diagnostic tool does not erase it. Aged components, cold solder joints, damp and corrosion on plugs, and voltage spikes are added to this.

Stored crash data is not a reliable proof of damage to the unit. Airbag24 erases it during the repair.

The other causes build up over time. Electronics age, solder joints can be cold, damp attacks the contacts, and voltage spikes arise, for example, from a weak battery or a jump-start.

How can you tell that the 95910-2Z500 is defective?

A defect shows itself mainly through the airbag warning light in the instrument cluster, which stays on permanently or intermittently. Error messages or connection problems with the diagnostic tool may also occur.

The following signs occur:

• Airbag warning light stays on permanently or intermittently
• Error message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

In such cases, airbags and seatbelt pretensioners may fail to deploy in an emergency. A prompt check provides clarity.

Which vehicles is the 95910-2Z500 fitted in?

The control unit 95910-2Z500 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The stored assignment is as follows:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

To confirm that you have the right unit, compare the part number on the label of the removed unit with this page. For the actual question of a fault, the fault memory read out beforehand is decisive, because it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2Z500 work?

First, have the fault memory read out and attach the log. Then disconnect the battery, afterwards remove the control unit, create the repair order online and pack the unit well before sending it. Processing at Airbag24 usually takes 3–4 working days.

On the test bench, Airbag24 examines the unit, replaces defective components, erases the stored crash data and tests the function. The repaired unit then goes back to you. The processing time at Airbag24 is usually 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2Z500 get to Airbag24?

The control unit reaches Airbag24 as a parcel, or you book a UPS collection for an extra charge. The return after the repair is made by UPS.

Include the printed repair order and make sure the unit is padded so that it arrives shockproof.