Airbag control unit with part number 95910-3B260

What is the function of the airbag control unit 95910-3B260?

The airbag control unit 95910-3B260 is the central control module for the occupant protection system in the Hyundai Equus VI (2009–2016). It processes data from crash sensors and determines whether to deploy airbags and seatbelt pretensioners, ensuring passenger safety during a collision.

As the brain of the passive safety system, this module continuously monitors signals from acceleration and pressure sensors distributed throughout the vehicle. It must detect within milliseconds whether a collision has occurred and which restraint systems need to be activated.

The primary task of the control unit is to trigger the igniters of the relevant airbags—such as driver, passenger, or side airbags—as well as the seatbelt pretensioners in the event of an accident. This precise control is critical for protecting occupants.

Why does the airbag control unit 95910-3B260 fail?

Malfunctions in the 95910-3B260 control unit are usually caused by internal electronic faults or stored crash data. Even after minor collisions without airbag deployment, the unit may become locked. Other causes include moisture ingress or failure of individual electronic components on the circuit board.

A common cause of failure is the storage of crash data. Following an accident—even if no airbags deployed—the control unit locks itself for safety reasons. This condition prevents further use and necessitates repair or professional reset.

Internal hardware defects are also a frequent source of issues. Individual electronic components on the circuit board, such as memory chips or processors, can fail. Such defects often result in total system failure or communication problems.

External factors like moisture due to vehicle leaks or improper repair attempts in the past can likewise lead to severe electronic damage to the control unit.

The technical problems of this model frequently occur with similar part numbers that share a comparable design, including 95910-3B150, 95910-3B160, 95910-3B270, 95910-3B460, and 95910-3B470.

How do you recognize a fault in the 95910-3B260 control unit?

A typical sign of a malfunction in the 95910-3B260 control unit is the permanently illuminated airbag warning light on the dashboard. Often, the control unit can no longer be read by a diagnostic tool, meaning there is no communication. Stored error codes frequently indicate internal component failures.

The most obvious symptom is the persistently lit airbag warning light. In some cases, it may only illuminate for about 30 seconds after starting the engine before remaining on, signaling a critical fault in the safety system.

Another clear indication is the lack of communication with a diagnostic device. The workshop cannot access the control unit to read error codes or perform diagnostics. The unit is essentially “dead” and does not respond to requests via the OBD interface.

If communication is still possible, specific error codes are often stored, such as “Internal Component Failure,” errors related to side, driver, or passenger airbags, or messages indicating blocked crash data.

Additional, less common symptoms may include complete failure when the unit heats up or a malfunction of the clock in the instrument cluster, if these systems are controlled through the control unit.

In which vehicles is the 95910-3B260 control unit installed?

The airbag control unit with part number 95910-3B260 is primarily designed for the sixth-generation Hyundai Equus. At Airbag24, we offer expert repairs specifically for this model to restore full functionality of the safety system.

At Airbag24, we repair this control unit for the following specific vehicle model:

Hyundai Equus VI (Type LZ/YJ, model years 2009–2016)

How is the 95910-3B260 control unit professionally repaired?

Professional repair of the 95910-3B260 control unit at Airbag24 involves a complete electronic restoration. This includes erasing stored crash data, replacing defective electronic components, and restoring communication. After testing, the unit functions like new and is immediately ready for use.

The process begins with removing the faulty control unit from the vehicle. If communication is still possible, it is advisable to read out the fault memory before removal. The unit is then securely packaged and shipped to Airbag24.

Upon receipt, our technicians perform a detailed diagnosis to identify the exact cause of the fault. This includes inspecting the circuit board and all relevant electronic components.

The actual repair involves erasing the stored crash data and resetting the module to factory settings. Defective parts are replaced with high-quality new components to ensure longevity and reliability.

Finally, the repaired control unit undergoes a functional test. Only when all functions operate flawlessly is it approved for return shipment. The repaired unit is “plug-and-play,” requires no re‑coding, and performs just like a brand‑new part. We provide a 12‑month warranty on every repair.

What shipping options does Airbag24 offer?

For repairing your control unit, Airbag24 provides flexible and secure shipping options. You can either send the package yourself at no cost or arrange a convenient UPS pickup at your preferred location. Return shipping is also free, via standard UPS or, optionally, express delivery with cash on delivery.

For outbound shipping, you can send the securely packaged control unit to us free of charge. Alternatively, you can use the convenient UPS pickup service, where a courier collects the package directly from your location—such as your home or workshop.

After the repair is completed, the following return‑shipping options are available:

Free standard UPS shipping is our default option. If you need faster delivery, you can choose UPS Express. Both options are also available with cash on delivery, should you prefer to pay upon receipt of the package.

In addition, you have the option to pick up the repaired control unit directly from our premises.