Airbag control unit with part number 95910-3M150

What does the airbag control unit 95910-3M150 do?

In the vehicle, the airbag control unit 95910-3M150 takes over control of the SRS restraint system in Hyundai. It processes the signals from the crash sensors, triggers the appropriate airbags and seatbelt pretensioners within milliseconds in a crash, and checks the system continuously.

If the electronics detect a fault, they show it via the airbag warning light in the instrument cluster. This warning is the direct way in which the unit reports a fault.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-3M150 fail?

The most common cause is crash data stored after an accident, even if no airbag has fired, because a standard diagnostic tool cannot remove it. Other causes are aged electronic components, cold solder joints, moisture or corrosion at plug connections, and voltage spikes from a weak battery or a jump start.

The crash data stays stored until someone deliberately removes it. The control unit therefore reports the fault even if the accident was a long time ago.

Aged components lose reliability, cold solder joints become unreliable, and moisture attacks plug contacts. This leads to contact faults that can recur.

How can you tell that the 95910-3M150 is defective?

A defect shows itself through the airbag warning light, through error messages in the instrument cluster and through the diagnostic tool not establishing a connection.

• Airbag warning light in the instrument cluster lit permanently or intermittently
• Error message in the instrument cluster
• The diagnostic tool gets no connection to the control unit
• The fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then fail to deploy. Have each of these signs checked promptly.

Which vehicles is the 95910-3M150 fitted in?

The 95910-3M150 is fitted in these vehicles: Hyundai Genesis BH (2008-2013).

The vehicles are listed one below another, as they are recorded for this control unit.

• Hyundai Genesis BH (2008-2013)

Two things help with the comparison. Comparing the part number on the label of the removed unit with this page only confirms that it is the correct unit. Having the fault memory read out beforehand, on the other hand, shows whether the control unit itself is defective or whether a plug or cable is causing the fault.

For the same vehicles, we also repair control units with the part numbers 95910-3M250, 95910-3M350.

How does the repair of the 95910-3M150 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

This sequence serves safety and is therefore binding.

On the test bench, Airbag24 checks the unit, replaces defective components and erases stored crash data. A function test completes the repair before your own unit is sent back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3M150 get to Airbag24?

Either you send the unit as a parcel or you book a UPS collection for an extra charge. The return after the repair is also made by UPS.

The printed repair order goes into the parcel, and the control unit is packed shockproof.