Airbag control unit with part number 95910-3N000

What is the function of Airbag Control Unit 95910-3N000?

The Delphi Airbag Control Unit 95910-3N000 is the central control module for the passive safety system (SRS) in the Hyundai Equus VI (model years 2009–2016). It processes signals from crash sensors, deploys airbags and seatbelt pretensioners in the event of a collision, and stores relevant crash data—actions that may lock its functionality after an incident.

As the “brain” of the restraint system, this control unit decides within milliseconds whether to trigger deployment. It continuously monitors all connected components, including impact sensors, airbag modules, seatbelt pretensioners, and seat occupancy detectors.

A critical function is storing crash data in its internal memory. After an airbag deployment, the unit locks itself to force a full-system diagnostic check. This lock is not a software malfunction but a safety‑related hardware blockage.

Why does Airbag Control Unit 95910-3N000 fail?

The most common cause of failure for control unit 95910-3N000 is the storage of crash data following an accident, which intentionally locks the system. Other defects arise from hardware aging, moisture ingress, or improper prior repair attempts that damage electronic components such as capacitors.

Crash‑data‑induced locking is the most frequent reason for repairs. The unit remains fully functional after a crash but is electronically disabled. A replacement purchase isn’t necessary, as the data can be professionally erased.

Hardware faults on the circuit board are another common issue. Aging, vibrations, or moisture intrusion can cause individual electronic components—such as capacitors or other parts—to fail. Improper repair attempts can also lead to irreparable damage.

This control unit is specific to the Delphi type, which also includes the technically related variant 95910-3B150. Fault patterns are often identical across these units.

How do you recognize a defect in control unit 95910-3N000?

A defect in control unit 95910-3N000 primarily manifests as a permanently illuminated airbag warning light on the instrument cluster. Additionally, communication with the unit often fails during OBD diagnostics. In some cases, the light may glow faintly, flash intermittently, or exhibit unusual electrical symptoms.

The most obvious symptom is the persistent activation of the airbag warning light. It does not turn off after starting the engine, indicating that the safety system is inoperative and would not deploy in a crash.

Another clear sign is the lack of communication with the diagnostic tool. When a workshop attempts to read the fault memory, no response is received from the airbag control unit, suggesting either an internal lock or a severe hardware failure.

Rarer yet, specific electrical phenomena may occur, such as a dimly glowing or irregularly flashing airbag light. A defect in the speedometer illumination that appears only when the vehicle is locked has also been observed in connection with this control unit.

In which vehicles is control unit 95910-3N000 installed?

The airbag control unit with part number 95910-3N000 is specifically fitted to the sixth-generation Hyundai Equus (VI), produced between 2009 and 2016. At Airbag24, we offer professional repair services for this particular model to restore full functionality of the safety system.

At Airbag24, we service control unit 95910-3N000 for the following model:

Hyundai: Equus VI (model years 2009–2016)

It is crucial that the part number matches exactly to ensure compatibility. Repair represents a cost‑effective, sustainable alternative to the expensive purchase of a new original part.

How is control unit 95910-3N000 professionally repaired?

During professional repair of 95910-3N000, stored crash data is first erased at the hardware level. This is followed by a thorough inspection, with defective electronic components replaced if necessary. After successful testing, the control unit functions like new, without requiring re‑coding in the vehicle.

The repair process at Airbag24 begins upon receipt of the removed control unit. First, an incoming inspection verifies the reported fault and examines the device for external damage.

The key step is erasing the crash data. This is accomplished by directly reading and reprogramming the internal memory, thereby restoring factory functionality and lifting the electronic lock.

At the same time, all relevant hardware components, such as capacitors and other electronic parts, are inspected and replaced if necessary. This ensures that age‑related or moisture‑induced damage is also repaired.

After refurbishment, each control unit undergoes a comprehensive functional test on the test bench. The repair is a plug‑and‑play solution that requires no reprogramming in the vehicle and is backed by a 12‑month warranty.

What shipping options are available at Airbag24?

For repairing your control unit at Airbag24, you can either send the package yourself free of charge or arrange a convenient UPS pickup at your preferred location. Returns are equally flexible, offered either as free standard UPS shipping, express delivery, or cash on delivery, allowing you to tailor the process to your needs.

For sending your defective control unit to us, we provide two convenient options. You can either ship the package yourself or request a UPS pickup organized by us, with the package collected directly from your chosen address.

The return shipment of the repaired unit is provided free of charge via standard UPS shipping as a default option.

If faster delivery is required, you can opt for UPS express shipping.

Both standard and express shipping are additionally available as cash‑on‑delivery options, should you prefer to pay upon receipt of the goods.

Alternatively, you have the option to pick up your repaired control unit in person at our premises.