Airbag control unit with part number 95910-3T100

What is the function of the Airbag Control Unit 95910-3T100?

The Airbag Control Unit 95910-3T100 is the central control module for the Supplemental Restraint System (SRS) in Kia K900 KH models. It serves as a diagnostic control module that processes signals from crash sensors and, in the event of an accident, controls the deployment of airbags and seatbelt pretensioners.

As a primary OEM part number, this control unit is listed directly in Kia’s official parts catalog. It is responsible for monitoring and ensuring the proper functioning of the vehicle’s entire passive safety system.

The module continuously communicates with all relevant sensors and actuators of the airbag system to maintain constant operational readiness and log any system faults.

Why does the Control Unit 95910-3T100 fail?

A major reason for failure of the Control Unit 95910-3T100 is the storage of crash data after an accident, which locks the module. Other causes include internal hardware defects in individual electronic components, leading to communication failures or persistent, non‑erasable errors in the fault memory.

After an accident, so‑called crash data is permanently stored in the control unit’s memory. This lock is intentionally designed by the manufacturer to prevent reuse without professional repair.

Furthermore, malfunctions can occur even without an accident. These often manifest as a complete loss of communication with the vehicle, preventing diagnostic tools from accessing the module and causing the system to be reported as faulty.

How do you recognize a defect in the 95910-3T100?

A defective Airbag Control Unit 95910-3T100 primarily shows itself through a constantly illuminated airbag warning light on the instrument cluster. Additional symptoms include lack of communication with diagnostic equipment, persistent error codes in the fault memory that cannot be cleared, and, in some cases, a simultaneously flashing engine warning light.

The most obvious sign is the persistently lit airbag warning lamp. It does not turn off after starting the engine, indicating a serious and permanent SRS malfunction.

Another clear indication is when the workshop’s diagnostic tool cannot establish a connection to the airbag control unit. The module fails to respond to queries and becomes unreachable within the vehicle network.

Occasionally, error codes are also stored that refuse to reset despite fixing the underlying cause. This points to an internal fault in the control unit’s memory.

In which models is the 95910-3T100 installed?

The Airbag Control Unit with part number 95910-3T100 is specifically designed for vehicles manufactured by Kia. At Airbag24, this module is offered for repairing the Kia K900 of the KH series, produced between 2012 and 2018.

According to the manufacturer’s specifications and parts documentation, compatibility of this part number is limited to the Kia K900 (KH) model. At Airbag24, we repair the 95910-3T100 control unit for the following model:

Kia K900 (KH series, model years 2012–2018)

How is the 95910-3T100 professionally repaired?

Professional repair of the 95910-3T100 control unit at Airbag24 begins with a comprehensive device inspection to accurately diagnose the fault. Depending on the defect, stored crash data is then erased, faulty electronic components are replaced, and the unit is reset to restore full functionality.

Upon submission to Airbag24, each control unit undergoes an initial incoming inspection. Technicians analyze the fault memory and test the device’s communication to determine the exact cause of failure.

The core of the repair involves addressing the identified defects. This includes professionally erasing crash data from the internal memory or replacing defective components on the circuit board.

Following restoration, the control unit undergoes a final test to verify correct operation. We provide 2 years' statutory liability for defects on every completed repair.

Is repairing the 95910-3T100 worthwhile?

Yes, repairing the Airbag Control Unit 95910-3T100 is an economically sensible alternative to costly new purchases. Not only do you save significantly, but you also receive a professionally refurbished original part that regains its full functionality and comes with 2 years’ statutory liability for defects.

The biggest advantage lies in the substantial cost savings compared to purchasing a new unit from the manufacturer. Repair costs often amount to just a fraction of the price of a new control unit.

Since this is a repair of your original part, time-consuming and costly programming or coding procedures after installation—often required with a new part—are unnecessary.

With over 20 years of experience and more than 20,000 repairs performed in the field of control unit refurbishment, we ensure high quality and reliability in all our work.