Airbag control unit with part number 95910-3T600

What does the airbag control unit 95910-3T600 do?

The airbag control unit 95910-3T600 is the central control unit of the SRS restraint system for Kia vehicles. It processes the crash sensor signals, assesses an accident within milliseconds and triggers the intended airbags and seatbelt pretensioners.

At the same time, it monitors the connected components continuously. If it detects a fault, it displays this via the airbag warning light. After a crash, it stores crash data and locks itself afterwards.

Why does the control unit 95910-3T600 fail?

Crash data stored after an accident is the most common cause of a fault in the 95910-3T600, even if no airbag has deployed. An ordinary diagnostic tool does not clear it. Other causes include aged components, cold solder joints, moisture and corrosion on the plugs, and voltage spikes.

Crash data is central to fault finding, because the control unit stores it regardless of whether an airbag was triggered. A read-out then shows a fault, even though the electronics themselves may be intact.

The remaining causes are linked to ageing and environmental influences. Components lose performance over the years, solder joints can be cold, and moisture or corrosion at plug connections disrupt transmission. Voltage spikes from a weak battery or a jump start add further strain.

How can you tell that the 95910-3T600 is defective?

A defect in the control unit 95910-3T600 shows up through the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Accompanying signs are an error message, a diagnostic tool that finds no connection and a fault memory that cannot be cleared.

In this state, airbags and seatbelt pretensioners may possibly fail to deploy in an emergency. The warning light gives the indication immediately, so you should have the vehicle checked promptly.

Which vehicles is the 95910-3T600 fitted in?

The control unit 95910-3T600 is fitted in these vehicles: Kia K900 KH (2012-2018).

These vehicles are recorded for this part number:

• Kia K900 KH (2012-2018)

Before removal, compare the part number on the label of the unit with this page. That way you know you have the right unit in front of you. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or a cable is causing the problem.

For the same vehicles, we also repair control units with the part numbers 56900-3T700BNH, 80100J6500RBQ, 85010-3T500, 95910-3T100.

How does the repair of the 95910-3T600 work?

Airbag24 usually needs 3–4 working days to process the 95910-3T600. Beforehand, you have the fault memory read out, enclose the log and disconnect the battery. Only then remove the control unit, create a repair order online and send it in.

At Airbag24, the unit is checked on the test bench, defective components are repaired, the crash data is erased and a function test is carried out. Afterwards your own unit goes back to you. The 3–4 working days apply only to this work. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3T600 get to Airbag24?

You send the control unit 95910-3T600 as a parcel, or book a UPS collection for an extra charge. After the repair, UPS brings the unit from Airbag24 back to you.

Place the printed repair order in the parcel and pack the unit shockproof.