Airbag control unit with part number 95910-3X050

What does the airbag control unit 95910-3X050 do?

The airbag control unit 95910-3X050 is the central control unit of the restraint system (SRS) for Hyundai. From the signals of the crash sensors, it determines in an accident within milliseconds which airbags and seatbelt pretensioners are triggered.

It also monitors the system continuously during operation and reports faults via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-3X050 fail?

The most common cause is stored crash data after an accident, even without a triggered airbag. Further causes are:

• aged electronic components,
• cold solder joints,
• moisture and corrosion at plug connections,
• voltage spikes, for example from a weak battery.

A normal diagnostic tool leaves the crash data in place, it cannot erase it. During the repair at Airbag24 it is erased.

The other causes concern the electronics and their connections.

How can you tell that the 95910-3X050 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently in the event of a defect in the 95910-3X050. Also a fault message in the instrument cluster, a missing connection of the diagnostic tool to the control unit, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger under such a defect. The warning light indicates the condition and must therefore be taken seriously.

A diagnostic tool reads out the stored faults.

Which vehicles is the 95910-3X050 fitted in?

The 95910-3X050 is fitted in these vehicles: Hyundai Elantra MD.

The following vehicles are recorded for this part number in our database:

• Hyundai Elantra MD

Compare the part number on the label of the removed unit with this page. This only ensures that it is the right unit. Have the fault memory read out beforehand, because only that shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-3X050 work?

First read out the fault memory and attach the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

After that, your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3X050 get to Airbag24?

You send the control unit 95910-3X050 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Enclose the printed repair order in the parcel and pack the unit shock-proof.