Airbag control unit with part number 95910-3X200

What does the airbag control unit 95910-3X200 do?

The airbag control unit 95910-3X200 is the central control unit of the restraint system (SRS) for Hyundai. It monitors the crash sensors, decides in a crash on airbags and seatbelt pretensioners, and reports faults via the airbag warning light.

The unit works in the background and continuously checks wiring, sensors and firing circuits. This ongoing monitoring is not noticeable in everyday use.

After an accident it stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-3X200 fail?

The failure of the 95910-3X200 most often results from crash data stored after an accident, without an airbag having been triggered. A normal diagnostic tool cannot erase this crash data.

Other causes are ageing electronic components, cold solder joints, and moisture and corrosion on plug connections.

Voltage spikes can also stress the control unit, for example with a weak battery or when a jump start is connected. Such loads may remain unnoticed for a long time.

How can you tell that the 95910-3X200 is defective?

A defect on the 95910-3X200 may show as the airbag warning light in the instrument cluster, which stays on permanently or intermittently. A fault message in the instrument cluster, no contact from the diagnostic tool, or a fault memory that cannot be cleared are also typical.

The warning light is the most important warning sign you have in the car. If it does not go out after starting, you should look into the matter.

If the diagnostic tool cannot establish a connection or the memory cannot be emptied, the situation is serious. Airbags and seatbelt pretensioners may then fail to trigger in an emergency.

Which vehicles is the 95910-3X200 fitted in?

The 95910-3X200 is fitted in these vehicles: Hyundai Elantra MD. For Hyundai, this part number is listed according to the current data.

The list of vehicles stored for this part number follows here.

• Hyundai Elantra MD

Before removal, compare the part number on the label of the unit with the information above. Have the fault memory read out beforehand, so that it is ruled out that a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-3X200 work?

You read out the fault memory, remove the control unit 95910-3X200 and create a repair order online. At Airbag24, checking, repairing and testing usually take 3–4 working days.

The battery is disconnected before removal, the log goes into the parcel, and the unit is packed well cushioned.

On the test bench at Airbag24, defective components are repaired and stored crash data is removed. A function test follows, and your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3X200 get to Airbag24?

You can send a parcel yourself. Alternatively, you book a UPS collection for the control unit 95910-3X200 for an extra charge. The return of the repaired unit is handled by UPS.

Make sure the unit is packed shockproof and the repair order is in the parcel.