Airbag control unit with part number 95910-3X600

What does the airbag control unit 95910-3X600 do?

The airbag control unit 95910-3X600 coordinates the restraint system (SRS) of Hyundai. It evaluates the signals from the crash sensors and determines in an accident, within milliseconds, which airbags and seatbelt pretensioners are triggered.

During operation, the electronics monitor the entire system continuously. They report faults via the airbag warning light in the instrument cluster.

After an accident, the control unit stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-3X600 fail?

Stored crash data from an accident is the most common cause, even if no airbag has deployed. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, such as those caused by a weak battery.

Crash data cannot be erased with a normal diagnostic tool. Airbag24 removes it during the repair.

The other causes lie in the electronics themselves or at their connections. Components age, solder joints can go cold, and moisture attacks the contacts at plug connections.

How can you tell that the 95910-3X600 is defective?

The airbag warning light in the instrument cluster lights up continuously or intermittently when the 95910-3X600 is defective. An error message in the instrument cluster may also appear; in addition, the diagnostic tool may fail to establish a connection to the control unit, and a fault memory cannot be cleared.

In a real emergency, airbags and seatbelt pretensioners may then fail to deploy. The warning light should therefore be taken seriously and checked promptly.

A diagnostic tool reads out the stored faults and shows which area is affected.

Which vehicles is the 95910-3X600 fitted in?

The 95910-3X600 is fitted in these vehicles: Hyundai Elantra MD.

The following vehicles are recorded in our assignment for this part number:

• Hyundai Elantra MD

Compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. Have the fault memory read out beforehand, because only that shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-3X600 work?

First read out the fault memory and enclose the log. Then disconnect the battery, and only then remove the control unit. Next, create a repair order online and send the well-packed unit in.

Airbag24 checks the control unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

Afterwards, your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3X600 get to Airbag24?

You send the control unit 95910-3X600 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Place the printed repair order in the parcel and pack the unit shock-proof.