Airbag control unit with part number 95910-3X700

What does the airbag control unit 95910-3X700 do?

The airbag control unit 95910-3X700 controls the restraint system (SRS) in Hyundai. It evaluates the crash sensors, decides in a crash on triggering the airbags and seatbelt pretensioners, and monitors the entire system.

Faults are shown via the airbag warning light in the instrument cluster. After an accident, the unit stores crash data and locks itself.

These functions run constantly in the background, without you noticing anything.

Why does the control unit 95910-3X700 fail?

For 95910-3X700, the most common cause is crash data stored after an accident, even if no airbag has deployed. Further causes are aging of the components, cold solder joints, moisture and voltage spikes.

This crash data cannot be erased with a normal diagnostic tool. Airbag24 removes it as part of the repair.

The remaining causes in brief: electronic components can age, solder joints can come loose over time, and moisture and corrosion affect plug connections.

Voltage spikes, for example from a weak battery or a jump-start, can also damage the unit.

How can you tell that the 95910-3X700 is defective?

A defect in the 95910-3X700 shows itself through the airbag warning light, which comes on permanently or intermittently. Additionally, a fault message appears, the diagnostic tool has no connection to the control unit, or the fault memory cannot be cleared.

The airbag warning light is the clearest sign that the vehicle gives you about the unit. In an emergency, airbags and seatbelt pretensioners may fail to deploy, so have the vehicle checked promptly.

Which vehicles is the 95910-3X700 fitted in?

The control unit 95910-3X700 is fitted in these vehicles: Hyundai Elantra MD. This information gives a first indication before you remove the unit.

The overview lists the following vehicles:

• Hyundai Elantra MD

Two steps help here. First compare the part number on the label with this page, so that you know it is the correct unit. Then have the fault memory read out, because only that shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-3X700 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit 95910-3X700. Next, create the repair order online and pack the unit carefully.

The unit is then sent in. Airbag24 checks it on the test bench, replaces defective components, erases the crash data and carries out a function test.

Processing at Airbag24 usually takes 3–4 working days. After that, your unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-3X700 get to Airbag24?

You send the control unit 95910-3X700 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.