Airbag control unit with part number 95910-4T050

What does the airbag control unit 95910-4T050 do?

The 95910-4T050 belongs to the restraint system (SRS) of Kia and controls it. It processes the signals from the crash sensors and decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered.

The control unit monitors all components of the system continuously. If it finds a fault, it switches on the airbag warning light in the instrument cluster so that the condition is noticed.

After an accident it stores crash data and locks itself. This very point determines which steps are needed in a repair.

Why does the control unit 95910-4T050 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Also aged components, cold solder joints, moisture and corrosion at the plugs, and voltage spikes.

Crash data cannot be removed with a normal diagnostic tool. It therefore stays in memory, and Airbag24 removes it during the repair.

The other causes relate to aging, moisture and electrical stress. Voltage spikes arise, for example, from a weak battery or from a jump-start.

How can you tell that the 95910-4T050 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently. A defect in the 95910-4T050 also shows as an error message in the instrument cluster, as a missing connection of the diagnostic tool, or as a fault memory that cannot be cleared.

The warning light is the most visible sign and cannot be missed. Anyone who watches it notices early that the restraint system is not fully working.

In an emergency, airbags and seatbelt pretensioners may then fail to deploy. A permanently lit warning light is therefore a reason to have the car checked promptly.

Which vehicles is the 95910-4T050 fitted in?

Whether your model is included can be seen in the overview. The 95910-4T050 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The individual vehicles are listed here:

• Kia Sportage QL (2015-2021)

Compare the part number on the label of the removed unit with this page, then you know it is the correct unit. Also have the fault memory read out beforehand. Only this result shows whether the control unit itself is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-4T050 work?

First read out the fault memory and attach the log to the unit. Then disconnect the battery, remove the 95910-4T050 only after that, and create the repair order online before sending the well-packed unit in.

At Airbag24 the 95910-4T050 is examined on the test bench. Defective components are repaired, the stored crash data is erased, and a function test follows. Processing at Airbag24 usually takes 3–4 working days. Your own unit is then returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4T050 get to Airbag24?

You send the 95910-4T050 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back by UPS.

The printed repair order goes into the parcel, and the control unit must be packed shockproof.