Airbag control unit with part number 95910-4T100

What does the airbag control unit 95910-4T100 do?

The airbag control unit 95910-4T100 forms the central control of the restraint system (SRS) for Kia. Based on the signals from the crash sensors, it selects in an accident which airbags and seatbelt pretensioners are triggered, and does so within milliseconds.

During operation, the unit checks the restraint system continuously. If it detects a fault, it reports this via the airbag warning light in the instrument cluster.

After an accident, the electronics store crash data and lock themselves. Only a repair lifts the lock.

Why does the control unit 95910-4T100 fail?

Crash data from an accident is the most common cause, even if no airbag was triggered, and an ordinary diagnostic tool does not erase it. Aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start, can also cause the fault.

Crash data arises from an event the control unit has registered. An airbag does not need to have fired for this. The entries do not disappear on their own.

The other causes arise over time. Electronic components age, solder joints can become weak points, and moisture or corrosion attack the plug connections. Voltage spikes from the vehicle electrics also count among the possible causes.

How can you tell that the 95910-4T100 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. Also present may be a fault message, a missing connection to the diagnostic tool, and a fault memory that cannot be cleared.

There is then a risk that the airbags and seatbelt pretensioners will not deploy in an emergency. Anyone who notices these signs has little room to manoeuvre, because the safety of the system is affected.

The warning light already shows the defect. It is therefore not worth waiting, but rather having the control unit checked promptly.

Which vehicles is the 95910-4T100 fitted in?

The unit 95910-4T100 is fitted in these vehicles: Kia Sportage QL (2015-2021). This assignment shows whether it suits your car.

The list of vehicles follows directly:

• Kia Sportage QL (2015-2021)

Comparing the label only shows that you have the right part number, nothing more. Have the fault memory read out before you remove anything, because only this record shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-4T100 work?

Airbag24 needs 3–4 working days in total for checking, repairing, erasing the crash data and the function test. Your own steps come before that and consist of reading out, disconnecting and removing.

Before you send in the control unit, have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit, in exactly this order, because it serves safety. Only then create a repair order online.

At Airbag24 the unit is examined on the test bench, defective components are replaced, the crash data is erased and a function test is carried out. Afterwards the unit returns to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4T100 get to Airbag24?

Either you send the control unit 95910-4T100 as a parcel to Airbag24, or for an extra charge you book a UPS collection. The return shipment after the repair is made by UPS.

The printed repair order goes into the parcel, and the unit is packed shock-proof.