Airbag control unit with part number 95910-4T150

What does the airbag control unit 95910-4T150 do?

The airbag control unit 95910-4T150 controls the restraint system (SRS) in the vehicle of make Kia. It evaluates the crash sensors and decides in an accident which airbags and seatbelt pretensioners are triggered.

The decision is made in milliseconds. At the same time the unit monitors the system during operation and reports faults via the airbag warning light in the instrument cluster.

After an accident it stores crash data and then locks itself.

Why does the control unit 95910-4T150 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Further causes are these:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery

Crash data cannot be removed with a normal diagnostic tool. The other causes are hardly visible from the outside; they only show up during readout.

How can you tell that the 95910-4T150 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. Fault messages in the instrument cluster, a missing contact to the diagnostic tool and a fault memory that cannot be cleared are added.

A diagnostic tool without a connection to the control unit indicates disrupted communication. You should also take a warning light that only lights up intermittently seriously.

In an emergency, airbags and seatbelt pretensioners may not trigger. Therefore have the finding checked.

Which vehicles is the 95910-4T150 fitted in?

First check whether your vehicle belongs to this assignment. The 95910-4T150 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The following overview shows the vehicles for which this control unit is stored:

• Kia Sportage QL (2015-2021)

Compare the part number on the label of the removed unit with this page. This only ensures that it is the correct unit. Also have the fault memory read out, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-4T150 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit, and create a repair order online. Processing at Airbag24 usually takes 3–4 working days.

Pack the unit well and send it in. Airbag24 checks it on the test bench, replaces defective components, deletes the stored crash data and carries out a function test.

Afterwards your own control unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4T150 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns it by UPS.

Pack the unit shock-proof and enclose the printed repair order.