Airbag control unit with part number 95910-4T200

What does the airbag control unit 95910-4T200 do?

The airbag control unit 95910-4T200 coordinates the SRS restraint system of Kia. In an accident it checks the measurements of the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners trigger. After an accident it stores crash data and locks itself.

During normal operation the control unit monitors the components of the system. If it detects a fault, the airbag warning light in the instrument cluster lights up and the entry is saved in the memory.

Why does the control unit 95910-4T200 fail?

Stored crash data from an accident are the most common cause, even if no airbag has deployed. Further causes are aged electronic components, cold solder joints, moisture or corrosion at plug connections, and voltage spikes in the vehicle electrical system.

The crash data remain in the unit until they are erased. A diagnostic tool reads the entries but does not remove them. That is done by Airbag24 during the repair.

Voltage spikes arise, for example, from a weak battery or a jump-start, and electronics age over time.

How can you tell that the 95910-4T200 is defective?

The airbag warning light in the instrument cluster is the most important sign. It is on permanently or intermittently, accompanied by an error message in the instrument cluster, a missing connection to the diagnostic tool and a fault memory that cannot be cleared.

• Airbag warning light stays on permanently
• Airbag warning light comes on only intermittently
• Error message in the instrument cluster
• Diagnostic tool finds no control unit
• Fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then not deploy. Therefore have the finding checked promptly.

Which vehicles is the 95910-4T200 fitted in?

The 95910-4T200 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The vehicles in detail:

• Kia Sportage QL (2015-2021)

Comparing the label on the removed unit checks only whether it matches this page, not more. The question of the cause is answered only by the read-out fault memory: it shows whether the control unit 95910-4T200 is defective or whether a plug or a cable is the problem. Therefore have it read out before removal.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-4T200 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit and create a repair order online. Send the well-packed unit.

Airbag24 tests the unit on the test bench, replaces defective components and erases the crash data. A function test follows, after which your own unit is returned. Checking, repairing and testing at Airbag24 usually take 3–4 working days.

The sequence serves safety. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4T200 get to Airbag24?

The control unit 95910-4T200 comes to Airbag24 as a parcel, or you book a UPS collection for an extra charge. The return after the repair is made by UPS.

The printed repair order belongs in the parcel. Pack the control unit shock-resistant.