Airbag control unit with part number 95910-4U650

What does the airbag control unit 95910-4U650 do?

The airbag control unit 95910-4U650 controls the restraint system (SRS) of Kia. It checks the signals of the crash sensors, determines in a collision within milliseconds the triggering of airbags and seatbelt pretensioners, and reports faults via the airbag warning light.

Faults are recorded in the fault memory while the unit checks the system in the background. If an accident has occurred, it stores crash data and is locked afterwards.

That the system works unobtrusively is due to this constant self-check.

Why does the control unit 95910-4U650 fail?

The most common cause is crash data from an earlier accident, even if no airbag was triggered; an ordinary diagnostic tool does not erase it. In addition, electronic ageing, cold solder joints, wetness at plugs and voltage spikes come into consideration.

Existing crash data does not prove that the unit is broken. Airbag24 removes it during the repair.

Electronic ageing and wetness take effect over a longer period. Voltage spikes, for example from a weak battery or jump starting, add further stress to the unit.

How can you tell that the 95910-4U650 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. In addition, an error message, a missing connection to the diagnostic tool or a fault memory that cannot be cleared may occur.

In this state, airbags and seatbelt pretensioners may possibly not deploy in an emergency. That is what makes the warning serious.

The warning light should therefore be checked promptly, so that you have clarity.

Which vehicles is the 95910-4U650 fitted in?

The control unit 95910-4U650 is fitted in these vehicles: Kia Optima TF (2010-2015).

The overview lists the models for this part number:

• Kia Optima TF (2010-2015)

Compare the imprint on the label of the removed unit with this page. A match only means that it is the matching unit. Have the fault memory read out beforehand, because only its log shows whether the control unit is defective or a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 692002T010, 95910-2G400, 95910-D5000, 95910-D5500.

How does the repair of the 95910-4U650 work?

First have the fault memory read out and attach the log to the unit. Then disconnect the battery before you remove the control unit. Next, create a repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, renews defective components, deletes the stored crash data and carries out a function test. Afterwards your own, repaired unit goes back to you.

Processing at Airbag24 usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4U650 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. After the repair the unit comes back to you via UPS.

Enclose the printed repair order in the parcel and pack the unit shock-proof.