Airbag control unit with part number 95910-4V000

What does the airbag control unit 95910-4V000 do?

The airbag control unit 95910-4V000 is the central control unit of the restraint system (SRS) for Hyundai. It processes the signals from the crash sensors and, in an emergency, determines within milliseconds which airbags and seatbelt pretensioners are triggered.

In addition, it monitors the system continuously, and faults appear via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself. The lock is only lifted by the repair.

Why does the control unit 95910-4V000 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Added to this are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data remains stored in the control unit until the repair removes it. The other causes concern the electronics and connections of the unit.

A weak battery or a jump start can cause voltage spikes that strain the electronics. Moisture and corrosion attack the plug connections.

How can you tell that the 95910-4V000 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently, an error message appears in the instrument cluster, and the diagnostic tool gets no connection to the control unit. In addition, the fault memory cannot be cleared. In that case, airbags and seatbelt pretensioners may not deploy in an emergency.

• Airbag warning light in the instrument cluster lights up constantly or intermittently
• Error message in the instrument cluster
• No connection between the diagnostic tool and the control unit
• Fault memory cannot be cleared

Each of these signs is a reason to have the fault memory read out before you take any further step.

Which vehicles is the 95910-4V000 fitted in?

The control unit 95910-4V000 is fitted in these vehicles: Hyundai Elantra MD.

The list shows the vehicles that are assigned to this part number.

• Hyundai Elantra MD

Comparing the part number on the label of the removed unit with this page confirms that it is the right unit. Whether the control unit is faulty or a plug or cable is the cause, only the fault memory readout will show. Please have it read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-3X000, 95910-3X010, 95910-3X050, 95910-3X060, 95910-3X070, 95910-3X100.

How does the repair of the 95910-4V000 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only afterwards remove the control unit; next, create a repair order online and send in the well-packed unit. Airbag24 checks it on the test bench, replaces defective components, erases stored crash data and carries out a function test; processing usually takes 3–4 working days.

The order serves safety. The log records the state of the system before removal.

Afterwards, your own repaired control unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4V000 get to Airbag24?

Either you send the unit in as a parcel or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Pack the control unit shock-proof and enclose the printed repair order.