Airbag control unit with part number 95910-4X100

What does the airbag control unit 95910-4X100 do?

The airbag control unit 95910-4X100 is responsible for the restraint system (SRS) of Kia. It reads the crash sensors and determines in an accident which airbags and seatbelt pretensioners are triggered. The calculation takes only milliseconds.

During operation the unit evaluates the system continuously. In the event of a fault, the airbag warning light in the instrument cluster lights up.

After an accident the control unit creates crash data and locks itself.

Why does the control unit 95910-4X100 fail?

Crash data from an accident is the most common cause, even if no airbag was triggered. A normal diagnostic tool does not delete it. In addition, the control unit 95910-4X100 suffers from aged components, cold solder joints, moisture on plug connections and voltage spikes.

Crash data is recorded in the control unit. Airbag24 removes it during the repair.

In addition, aged electronics, cold solder joints, and moisture and corrosion on plug connections cause failures.

Voltage spikes, for example from a weak battery or a jump start, put the electronics under further pressure.

How can you tell that the 95910-4X100 is defective?

An airbag warning light in the instrument cluster that lights up permanently or from time to time indicates a defect on the 95910-4X100. In an emergency, airbags and seatbelt pretensioners may possibly not trigger.

Further signs are a diagnostic tool that cannot connect to the control unit, and a fault memory that cannot be cleared. These signs also argue for having the system checked.

The warning light is therefore the most direct hint the vehicle gives. Respond to it promptly.

Which vehicles is the 95910-4X100 fitted in?

The control unit 95910-4X100 is fitted in these vehicles: Kia Rio UB (2011-2017).

Here is the list of vehicles:

• Kia Rio UB (2011-2017)

Compare the part number on the label of the removed unit with this page. The comparison only confirms the identity of the unit. Have the fault memory read out beforehand, because it alone shows whether the control unit itself is affected or whether a plug or cable is causing the fault.

For the same vehicles, we also repair control units with the part numbers 0K32B677F0, 95910-0W500, 95910-1W100, 95910-1W500, 95910-1W510, 959101G900.

How does the repair of the 95910-4X100 work?

First have the fault memory read out and enclose the log with the unit. Then disconnect the battery, remove the control unit 95910-4X100 and create the repair order online. Afterwards you send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, deletes the crash data and carries out a function test. Then your own unit is returned.

Airbag24 typically schedules 3–4 working days for this work. The steps before shipping are not part of this.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4X100 get to Airbag24?

Either you hand in the control unit as a parcel, or you book a UPS collection for an extra charge. After the repair Airbag24 brings it to you by UPS.

Pack the control unit shockproof and enclose the printed repair order.