Airbag control unit with part number 95910-4Y200

What does the airbag control unit 95910-4Y200 do?

In the Kia, the airbag control unit 95910-4Y200 controls the restraint system (SRS). It evaluates the crash sensors, decides on airbags and seatbelt pretensioners within milliseconds in a crash, and monitors the system continuously.

If it detects a fault, the airbag warning light in the instrument cluster comes on, so you can see the finding immediately.

After an accident the unit stores crash data and locks itself. In everyday language the same component is also called the SRS control unit.

Why does the control unit 95910-4Y200 fail?

The most common cause is that crash data was stored after an accident, even if no airbag has deployed. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also causes.

A standard diagnostic tool cannot clear this crash data. The deletion takes place at Airbag24 as part of the repair.

The other causes mainly relate to ageing, moisture and the power supply. Voltage spikes arise, for example, from a weak battery or when starting with an external power source.

How can you tell that the 95910-4Y200 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message also appears in the instrument cluster. The diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

The warning light is the most important signal, and the error message confirms it.

In an emergency, airbags and seatbelt pretensioners may fail to deploy. Therefore have the system checked promptly.

Which vehicles is the 95910-4Y200 fitted in?

The 95910-4Y200 is fitted in these vehicles: Kia Rio UB (2011-2017).

Here you can see in which vehicles this unit is fitted:

• Kia Rio UB (2011-2017)

Comparing the part number on the label of the removed unit with this page only confirms that you have the correct unit. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 0K32B677F0, 95910-0W500, 95910-1W100, 95910-1W500, 95910-1W510, 959101G900.

How does the repair of the 95910-4Y200 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Afterwards create a repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components and clears the stored crash data. A function test follows, and the unit is returned to you.

Processing at Airbag24 usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-4Y200 get to Airbag24?

You send the control unit 95910-4Y200 in as a package or book a UPS collection for an extra charge. Airbag24 returns it by UPS after the repair.

Enclose the printed repair order with the package and pack the unit shock-proof.