Airbag control unit with part number 95910-59000

What does the airbag control unit 95910-59000 do?

The airbag control unit 95910-59000 forms the central control unit of the SRS restraint system in Hyundai vehicles. It processes the signals from the crash sensors, determines within milliseconds in a crash which airbags and seatbelt pretensioners fire, and indicates faults via the airbag warning light. After an accident it stores crash data and locks itself.

The monitoring runs throughout every journey, even if you notice nothing of it.

The unit reports irregularities immediately via the instrument cluster, so that you can respond.

Why does the control unit 95910-59000 fail?

On the 95910-59000, the most common cause is crash data remaining in memory after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it. In addition there are ageing components, cold solder joints, moisture and corrosion on plugs, and voltage spikes, for example from a weak battery or jump-starting.

Troubleshooting with a diagnostic tool stalls on the crash data, because the entries cannot be removed.

The other causes tend to develop over time. Electronic components age, solder joints can go cold, and moisture attacks plug connections.

How can you tell that the 95910-59000 is defective?

A defect on the 95910-59000 shows up as an airbag warning light in the instrument cluster that lights up permanently or intermittently, and as a fault message there. In addition, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

With these signs, the airbags and seatbelt pretensioners may not be able to deploy in an emergency. The light is therefore a clear warning. Please have the system checked promptly.

Which vehicles is the 95910-59000 fitted in?

The control unit 95910-59000 is fitted in these vehicles: Hyundai H350 (2015-2019).

An overview of the vehicles known to us for this part number:

• Hyundai H350 (2015-2019)

Compare the part number on the unit's label with this page so that you have the right unit in front of you. This comparison says nothing about the condition. Therefore have the fault memory read out beforehand, because only the log shows whether the control unit itself or a plug or cable is the cause.

How does the repair of the 95910-59000 work?

For the 95910-59000, first have the fault memory read out and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Create the repair order online, and then send in the well-packed unit. Airbag24 usually needs 3–4 working days for testing, repair and function test.

On the test bench, Airbag24 checks the unit, eliminates faults in individual components, deletes the crash data and checks the function. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-59000 get to Airbag24?

You send the control unit 95910-59000 as a parcel, or book a UPS collection for an extra charge. Airbag24 returns it by UPS after the repair.

Enclose the printed repair order in the parcel. Pack the unit shock-proof so that it arrives undamaged.