Airbag control unit with part number 95910-A0050

What does the airbag control unit 95910-A0050 do?

The airbag control unit 95910-A0050 is the central control unit of the restraint system (SRS) in Hyundai. It evaluates the signals from the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

During operation it monitors the entire system continuously. If it detects a fault, it reports this via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and then locks itself.

Why does the control unit 95910-A0050 fail?

For the 95910-A0050, the most common cause is crash data stored after an accident, even if no airbag has deployed. Aged components, cold solder joints, moisture and corrosion, and voltage spikes are also possible causes.

Crash data cannot be erased with a normal diagnostic tool. Airbag24 erases it during the repair.

The other causes at a glance:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

How can you tell that the 95910-A0050 is defective?

A defect in the 95910-A0050 shows up as the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Added to this are a fault message in the instrument cluster, no connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared.

The warning light is the most important sign, because it shows that the system has detected a fault. If there is no connection to the diagnostic tool, the control unit cannot be checked, and the fault memory remains.

In an emergency, airbags and seatbelt pretensioners may then fail to deploy. That is why the light must be taken seriously, even if the vehicle otherwise behaves normally.

Which vehicles is the 95910-A0050 fitted in?

Whether your car contains this control unit depends on the model. The 95910-A0050 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The vehicles in our assignment are:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the part number on the label of the removed unit with this page. That only confirms that you have the correct unit in front of you. Also have the fault memory read out before removal, because only that shows whether the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0050 work?

For the 95910-A0050, first have the fault memory read out and enclose the log. Processing at Airbag24 usually takes 3–4 working days.

Then disconnect the battery before removing the control unit. Afterwards, create a repair order online and send the well-packed unit.

Airbag24 checks the unit on the test bench and replaces defective components. It then erases the stored crash data and carries out a function test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0050 get to Airbag24?

You can send the 95910-A0050 as a parcel or have it collected by UPS for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit so that it is shock-resistant.