Airbag control unit with part number 95910-A0100

What does the airbag control unit 95910-A0100 do?

The airbag control unit 95910-A0100 coordinates the restraint system (SRS) for Hyundai. It reads the crash sensors, decides in an accident within milliseconds about airbags and seatbelt pretensioners, and monitors the system continuously. After an accident it stores crash data and locks itself.

A detected fault is shown via the airbag warning light in the instrument cluster. Seatbelt pretensioners and airbags also belong to the monitored area.

Why does the control unit 95910-A0100 fail?

The most common cause is crash data stored after an accident, even without a deployed airbag; a normal diagnostic tool cannot erase it. Airbag24 erases the crash data on the 95910-A0100 during the repair. Aging, cold solder joints, moisture at plug connections and voltage spikes are also possible.

The causes in detail:

• Aged electronic components
• Cold solder joints
• Moisture and corrosion at plug connections
• Voltage spikes, for example from a weak battery or a jump start

The crash data remain in the unit until the repair, regardless of whether an airbag has deployed.

How can you tell that the 95910-A0100 is defective?

A defect on the 95910-A0100 shows through the airbag warning light, which stays on permanently or intermittently in the instrument cluster. Fault messages and a diagnostic tool without a connection to the control unit are also signs, as is a fault memory that cannot be cleared. Airbags and seatbelt pretensioners may then fail to deploy in an emergency.

The signs at a glance:

• Airbag warning light in the instrument cluster, permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool without a connection to the control unit
• Fault memory cannot be cleared

Any one of these signs is reason enough to have the system checked.

Which vehicles is the 95910-A0100 fitted in?

The control unit 95910-A0100 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021). For this part number, the models named here are on record.

The associated vehicles are listed here:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the part number on the label of the removed unit with this page, and you will know it is the right unit. Before removing anything, have the fault memory read out, because only that shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0100 work?

First read out the fault memory and enclose the log, then disconnect the battery and remove the 95910-A0100. Create a repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

On the test bench, Airbag24 examines the unit, replaces defective components and carries out a function test. Stored crash data are erased in the process. The unit then comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0100 get to Airbag24?

You can send the control unit 95910-A0100 as a parcel or have it collected by UPS for an extra charge. Airbag24 sends it back by UPS after the repair.

The printed repair order goes into the parcel, and the unit is packed shockproof so that it survives shipping undamaged.