Airbag control unit with part number 95910-A0150

What does the airbag control unit 95910-A0150 do?

Within the restraint system (SRS) of Hyundai, the control unit 95910-A0150 is the central evaluation unit. It receives the readings from the crash sensors and decides in an accident which airbags and seatbelt pretensioners are triggered, within milliseconds. After an accident it stores crash data and locks itself.

The control unit continuously monitors the connected components. If it detects a fault, it stores the error and shows it via the airbag warning light.

This unit is therefore responsible for a working protection system, even when nothing stands out in everyday use.

Why does the control unit 95910-A0150 fail?

Stored crash data from an accident is the most common cause, even without a triggered airbag; a normal diagnostic tool cannot remove it. Add aged electronics, cold solder joints, moisture and corrosion on plugs, and voltage spikes, which arise for example with a weak battery.

The recording is made in an accident, even if the airbags do not trigger.

The other causes are ageing and environmental influences. Components wear out, solder joints can come loose, and moisture attacks the contacts.

How can you tell that the 95910-A0150 is defective?

A defect shows up as the airbag warning light, error messages in the instrument cluster and a diagnostic tool that cannot establish a connection. In an emergency, airbags and seatbelt pretensioners may therefore fail to trigger.

Signs include:

• Airbag warning light lit, permanently or intermittently
• Error message in the instrument cluster
• Diagnostic tool with no access to the control unit
• Fault memory that cannot be cleared

If you notice any of these signs, have the fault clarified promptly.

Which vehicles is the 95910-A0150 fitted in?

This control unit is fitted in vehicles of Hyundai, specifically in these models: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The list shows the affected vehicles individually.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Before removal, compare the part number on the label with this page. That only confirms the identity of the unit. Have the fault memory read out in addition, because the log shows whether the control unit itself is defective or whether plugs and cables are the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0150 work?

First have the fault memory read out and attach the log to the repair order. Then disconnect the battery; only after that remove the unit. Next create the repair order online and send the well-packed unit in.

At Airbag24 the unit is tested, defective components are replaced, stored crash data is deleted and the function is checked. This work usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0150 get to Airbag24?

Either you send the unit as a package, or you book a UPS collection for an extra charge. The return after the repair also runs via UPS.

Place the printed repair order in the package and make sure the packaging is shock-resistant.