Airbag control unit with part number 95910-A0250

What does the airbag control unit 95910-A0250 do?

The airbag control unit 95910-A0250 is the control unit of the restraint system (SRS) in Hyundai. From the signals of the crash sensors it calculates in a crash, within fractions of a second, which airbags and seatbelt pretensioners are triggered, and it monitors the entire system without pause. It shows faults via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

Because all triggering depends on this unit, every irregularity in the restraint system must be taken seriously.

Why does the control unit 95910-A0250 fail?

The most common cause is crash data stored after an accident, even if no airbag triggered; a normal diagnostic tool cannot erase it. Other causes are ageing components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes in the vehicle electrical system.

Whether an airbag triggered in the end makes no difference to the storage. The unit records the data as soon as it has processed the accident.

The other causes relate to ageing and the environment. Electronic components age, solder joints can go cold, and moisture causes corrosion on plug connections that weakens the contact.

Voltage spikes arise, for example, with a weak battery or when a jump start is given. Before you suspect the control unit alone, it is therefore worth checking the vehicle electrical system.

How can you tell that the 95910-A0250 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, a fault message also appears in the instrument cluster, the diagnostic tool cannot find the control unit, or the fault memory cannot be cleared. In an emergency, the airbags and seatbelt pretensioners may then possibly not trigger.

The warning light is the clearest indication the vehicle gives. If it is lit, have the restraint system checked promptly.

A missing connection to the diagnostic tool does not necessarily lie with the control unit, but it is a finding you should take seriously.

Which vehicles is the 95910-A0250 fitted in?

The control unit 95910-A0250 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The overview shows which vehicles are known to us for this part number.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

First, compare the number on the label of the removed unit with this page, and then you know that it is the correct unit. Have the fault memory read out beforehand, because only that shows whether the control unit is the cause or whether a connector or cable is.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0250 work?

The order is fixed when removing the unit: first you have the fault memory read out and attach the log, then you disconnect the battery and only then remove the control unit. Afterwards you create the repair order online and send the well-packed unit. Airbag24 tests it on the test bench, repairs defective components, erases stored crash data and carries out a function test before your own unit is sent back to you.

Keep to this order for safety reasons, because the restraint system is touched during removal.

Processing at Airbag24 usually takes 3–4 working days and refers only to testing, repair and function test there.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0250 get to Airbag24?

You send the unit as a parcel or have a UPS collection carried out for an extra charge. Airbag24 returns the unit by UPS after the repair.

Pack the control unit shockproof and put the printed repair order in the parcel.