Airbag control unit with part number 95910-A0300

What does the airbag control unit 95910-A0300 do?

The control unit 95910-A0300 controls the restraint system (SRS) in the Hyundai vehicle. Based on signals from the crash sensors, it decides within fractions of a second which airbags and seatbelt pretensioners to trigger. After an accident it stores crash data and locks itself.

It continuously checks whether sensors, wiring and actuators are working. It stores any faults it finds and shows them via the airbag warning light.

The entire protection concept of the vehicle relies on this control unit.

Why does the control unit 95910-A0300 fail?

Most often the fault lies in crash data from an earlier accident, even if no airbag was triggered in that accident; a normal diagnostic tool does not erase it. Aged components, cold solder joints, moisture on connectors and voltage spikes are also possible causes.

The other causes at a glance:

• Aged electronic components
• Cold solder joints
• Moisture and corrosion on connectors
• Voltage spikes, for example from a weak battery

Crash data is created as soon as the control unit records an accident. It is not a defect in the strict sense, but a log.

How can you tell that the 95910-A0300 is defective?

A defect shows up as the airbag warning light, fault messages in the instrument cluster, the diagnostic tool failing to connect, or a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

Typical signs are:

• Airbag warning light in the instrument cluster permanently lit
• Same light coming on intermittently
• Message on the instrument cluster display
• Diagnostic tool has no access to the control unit
• Fault memory that cannot be cleared

If you notice any of these signs, have the fault clarified promptly.

Which vehicles is the 95910-A0300 fitted in?

The control unit 95910-A0300 is used in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The overview below shows the models in detail.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Before removal, compare the part number on the label with this page; this only confirms that it is the right unit. Whether there is a defect is determined solely by the fault memory, which you should have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0300 work?

First have the fault memory read out; the log belongs in the package. Then disconnect the battery and remove the unit, and only afterwards create the repair order online. Airbag24 usually needs 3–4 working days for testing, repair and checking.

On the test bench, Airbag24 examines the unit, replaces defective components, deletes stored crash data and carries out a function test.

Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0300 get to Airbag24?

You send the unit as a package or book a UPS collection for an extra charge. The return shipment is also made by UPS.

Put the repair order in the package and protect the unit with shock-resistant packaging.