Airbag control unit with part number 95910-A0350

What does the airbag control unit 95910-A0350 do?

The airbag control unit 95910-A0350 controls the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered. It monitors the system continuously and shows faults via the airbag warning light.

Monitoring covers the sensors, triggering units and wiring. As soon as a deviation occurs, the unit creates an entry in the fault memory.

After an accident, the unit stores crash data and locks itself. Beyond this fact, this page does not describe anything further.

Why does the control unit 95910-A0350 fail?

The most common cause at the 95910-A0350 is crash data stored after an accident, even if no airbag fired; a normal diagnostic tool cannot erase it. Other causes include aged components, cold solder joints, corrosion and voltage spikes.

• Aged electronic components
• Cold solder joints
• Moisture and corrosion at plug connections
• Voltage spikes, for example from a weak battery or jump-starting

This list gives an overview, but no diagnosis. Which cause applies to the unit is shown only by inspection.

How can you tell that the 95910-A0350 is defective?

The airbag warning light in the instrument cluster indicates a defect in the 95910-A0350 when it stays on permanently or intermittently. Fault messages in the instrument cluster and a diagnostic tool without connection to the control unit also point to one. In an emergency, the airbags and seatbelt pretensioners may then fail to deploy.

A fault memory that cannot be cleared is another sign that justifies having the unit checked.

Which vehicles is the 95910-A0350 fitted in?

The assignment on this page is based on our data for Hyundai. The control unit 95910-A0350 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The vehicles in detail:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the part number on the label of the removed unit with this page, because that only ensures it is the right unit. Have the fault memory read out beforehand, since this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0350 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send in the packed unit. Checking, repairing and testing at Airbag24 usually take 3–4 working days, after which your own unit is returned.

Airbag24 checks the unit, replaces defective components, erases stored crash data and carries out a function test.

The order of steps is a safety measure at the vehicle, which is why you remove the control unit only after disconnecting the battery.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0350 get to Airbag24?

You send the control unit 95910-A0350 in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order in the parcel and pack the unit shockproof.