Airbag control unit with part number 95910-A0450

What does the airbag control unit 95910-A0450 do?

The airbag control unit 95910-A0450 is responsible for deployment within the restraint system (SRS) of Hyundai. It processes the measurements from the crash sensors, decides within milliseconds in an accident whether the airbags and seatbelt pretensioners are triggered, and checks the system while you drive. After an accident it stores crash data and locks itself.

Faults are reported on the airbag warning light. It is one of the components on which occupants rely in an emergency.

Why does the control unit 95910-A0450 fail?

The main cause is stored crash data, even if no airbag has deployed; a standard diagnostic tool cannot remove it. Other causes include ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start. Airbag24 erases the crash data during the repair.

The other causes concern the electronics and their contacts, i.e. solder joints, plugs and the power supply.

How can you tell that the 95910-A0450 is defective?

One sign is the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition there may be a fault message in the instrument cluster, a diagnostic tool without connection and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not deploy.

The warning light is the sign you will notice first in everyday driving. Take it seriously and have the cause checked.

Which vehicles is the 95910-A0450 fitted in?

The control unit 95910-A0450 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The list of vehicles stored for this number follows below.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Comparing the part number with the label on the removed unit only shows that you have the right unit in front of you. Have the fault memory read out beforehand; only the log shows whether the control unit itself is affected or whether plugs or cables are causing the fault.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0450 work?

You have the fault memory read out and attach the log before you disconnect the battery and remove the control unit. Then you create a repair order online and pack the unit for dispatch. Processing at Airbag24 usually takes 3–4 working days.

The battery is disconnected before removal, not afterwards.

Airbag24 checks the submitted control unit on the test bench, rectifies the fault in the affected components and carries out a function test. Stored crash data is erased in the process. Your own unit is then returned. The stated time covers only checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0450 get to Airbag24?

You send the control unit 95910-A0450 as a parcel or book UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.