Airbag control unit with part number 95910-A0600

What does the airbag control unit 95910-A0600 do?

The airbag control unit 95910-A0600 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the crash sensors, decides within milliseconds in an accident whether airbags and seatbelt pretensioners are triggered, and monitors the system continuously. After an accident it stores crash data and locks itself.

The unit shows detected faults via the airbag warning light. In this way the system remains transparent for the driver.

Why does the control unit 95910-A0600 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. A standard diagnostic tool cannot erase it. Further causes in brief:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

A fault from the crash data can remain even when the vehicle drives perfectly again after the accident.

How can you tell that the 95910-A0600 is defective?

A defect shows up as the airbag warning light in the instrument cluster staying on permanently or intermittently, as an error message there, and as a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may not be able to trigger.

Typical signs at a glance:

• Airbag warning light permanently or intermittently on
• Error message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

Which vehicles is the 95910-A0600 fitted in?

The control unit 95910-A0600 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The list shows the models in which this unit was fitted.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the part number on the label of the removed unit with this page, then you can be sure it is the right unit. Also have the fault memory read out beforehand, because only the log shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0600 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the well-packed unit in. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components, clears stored crash data and carries out a function test. The unit is then sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0600 get to Airbag24?

You send the control unit 95910-A0600 in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

The printed repair order belongs in the parcel, and the unit must be packed shock-proof.