Airbag control unit with part number 95910-A0800

What does the airbag control unit 95910-A0800 do?

The airbag control unit 95910-A0800 forms the central control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors, decides within milliseconds in an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. After an accident, it stores crash data and locks itself.

The unit reports faults via the airbag warning light in the instrument cluster. This covers sensors, wiring, seatbelt pretensioners and airbags.

The evaluation follows fixed criteria. Only a correctly functioning control unit ensures that the restraint system responds reliably in an emergency.

Why does the control unit 95910-A0800 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. A standard diagnostic tool cannot erase this data. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Stored crash data remains in the unit until it is removed. Airbag24 erases it during repair, regardless of which cause is ultimately found.

If components age or solder joints go cold, the reliability of the electronics suffers. Moisture and corrosion in plug connections disrupt contact, and voltage spikes, for example from a weak battery or a jump start, put strain on the unit.

How can you tell that the 95910-A0800 is defective?

A defect shows as the airbag warning light in the instrument cluster staying on constantly or intermittently, also through an error message in the instrument cluster, a lack of connection to the diagnostic tool and a fault memory that cannot be cleared. In that case, airbags and seatbelt pretensioners may possibly not deploy in an emergency.

The warning light is the most direct warning the unit gives, and it must not be ignored.

A light that goes out after a restart proves nothing about the state of the system, so reading out the fault memory remains the safe route.

Which vehicles is the 95910-A0800 fitted in?

The control unit 95910-A0800 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

We list these vehicles for the unit:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the part number on the label of the removed unit with this page, and you will know that you have the correct unit in front of you. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-A0800 work?

First have the fault memory read out and attach the log, then disconnect the battery and only then remove the control unit. Then create a repair order online and send the unit in well packed. The checking, repair and function test at Airbag24 usually take 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A0800 get to Airbag24?

You send the control unit 95910-A0800 in as a parcel or book a UPS collection for an extra charge; after the repair, Airbag24 returns it to you by UPS.

Enclose the printed repair order and pack the unit shock-proof.