Airbag control unit with part number 95910-A1100

What does the airbag control unit 95910-A1100 do?

The airbag control unit 95910-A1100 controls the SRS restraint system for Hyundai. Using the signals from the crash sensors, it decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the entire installation continuously.

The unit shows faults via the airbag warning light. After an accident it stores crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-A1100 fail?

Stored crash data is the most common cause, and this also applies if no airbag was triggered in the accident. A standard diagnostic tool does not delete it. Aged electronics, cold solder joints, moisture or corrosion on plugs, and voltage spikes can likewise be the cause.

That the data does not disappear with normal tools is due to its storage in the unit itself. Airbag24 deletes it during the repair.

Only a detailed examination reveals the other causes.

How can you tell that the 95910-A1100 is defective?

A defect shows up through the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition, fault messages appear in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

This means airbags and seatbelt pretensioners may possibly not deploy in an emergency. Take this danger seriously instead of ignoring the warning light.

The warning light comes on as soon as the system detects the fault, and it gives the clearest indication.

Which vehicles is the 95910-A1100 fitted in?

The 95910-A1100 was installed in these vehicles: Hyundai Santa Fe DM (2012-2015) and DM Facelift (2015-2018).

The overview below lists the vehicles one by one:

• Hyundai Santa Fe DM (2012-2015)
• Hyundai Santa Fe DM Facelift (2015-2018)

Comparing the part number on the label of the removed unit with this page ensures that it is the correct unit, nothing more. Before you change anything on the vehicle, have the fault memory read out. Only then do you see whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95700-2B110, 95910-0W100, 95910-26100, 95910-2B028, 95910-2B900, 95910-2B970.

How does the repair of the 95910-A1100 work?

First have the fault memory read out, attach the log and disconnect the battery before you remove the control unit. Afterwards you create the repair order online and send the unit in. Processing at Airbag24 usually takes 3–4 working days.

This order serves your safety. Afterwards you create the repair order online and pack the unit well for shipping.

Airbag24 checks the unit on the test bench, repairs or replaces defective components, deletes the stored crash data and carries out a function test. After that your own unit goes back to you. The time limit refers only to testing, repairing and testing at Airbag24. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A1100 get to Airbag24?

You send the unit to Airbag24 as a parcel or have it collected by UPS for an extra charge. The return after the repair follows by UPS.

Enclose the printed repair order and pack the control unit shock-proof.