Airbag control unit with part number 95910-A2310

What does the airbag control unit 95910-A2310 do?

The airbag control unit 95910-A2310 controls the restraint system (SRS) of Kia. It receives the signals from the crash sensors, decides in an accident within fractions of a second whether airbags and seatbelt pretensioners are triggered, and checks the system continuously for faults.

The unit outputs any faults it finds via the airbag warning light. The evaluation runs without interruption, so the decision is available in an emergency without delay.

After an accident, the control unit records crash data and locks itself. Please have a noticed fault checked promptly.

Why does the control unit 95910-A2310 fail?

Stored crash data after an accident is the most common cause, even if no airbag has deployed; a standard diagnostic tool cannot erase it. Other causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Stored crash data remains in the unit, even if neither an airbag nor a seatbelt pretensioner was triggered in the accident. It leaves an entry that a standard diagnostic tool cannot remove.

Electronic components age, and solder joints can go cold. Moisture and corrosion at plug connections disturb the contact, and voltage spikes in the vehicle electrical system also affect the electronics. Which cause is present is only shown by the investigation at Airbag24.

How can you tell that the 95910-A2310 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-A2310 permanently or intermittently. A fault message in the instrument cluster accompanies it, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

With this warning light, airbags and seatbelt pretensioners may not trigger in an emergency.

This applies regardless of how inconspicuously the vehicle behaves in everyday use, because the warning light indicates the defect.

Which vehicles is the 95910-A2310 fitted in?

The control unit 95910-A2310 is fitted in these vehicles: Kia cee'd JD (2012-2018).

The fitment covers these models:

• Kia cee'd JD (2012-2018)

Compare the part number on the label of the removed unit with this page, as this only confirms that you have the correct unit. Have the fault memory read out beforehand, because only the log shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 95910-A2100, 95910-A2320, 95910-A2750.

How does the repair of the 95910-A2310 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send in the well-packed 95910-A2310.

Airbag24 checks the unit on the test bench, repairs defective components, erases the stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days, after which your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A2310 get to Airbag24?

You send the control unit 95910-A2310 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Put the printed repair order into the parcel and pack the unit shock-resistant.