Airbag control unit with part number 95910-A2320

What is the function of the airbag control unit 95910-A2320?

The airbag control unit with part number 95910-A2320 is the central control module for the entire restraint system, primarily in the Kia cee'd of the JD series (2012–2018). It processes signals from crash sensors, deploys airbags and seatbelt pretensioners upon a collision, and stores relevant event data to ensure occupant safety.

As the brain of the passive safety system, this module decides within milliseconds which restraint devices need to be activated. It helps prevent severe injuries that could result from occupants striking hard parts of the vehicle body.

The control unit is typically installed in the center tunnel area near the gearshift lever. There are various versions of the device, which may differ by revision designations such as “VER 1.1” or “CON KIT,” but the core functionality remains identical.

Why does the control unit 95910-A2320 fail?

The most common cause of failure for the 95910-A2320 control unit is the permanent storage of crash data after an accident, which locks the system for safety reasons. Other defects arise due to aging, moisture, or vibrations, leading to failures in individual electronic components such as processors or capacitors.

After an airbag deployment, so‑called crash data is irrevocably stored in the control unit’s memory. This lock cannot be removed using conventional diagnostic tools and results in the airbag warning light remaining permanently illuminated.

In addition, hardware defects on the circuit board can also be responsible. Internal components like individual ICs or capacitors may fail due to thermal stress or material fatigue, causing an internal fault in the control unit.

This type of failure occurs not only with part number 95910-A2320 but also with compatible and related variants such as 95910-A2100, 95910-A2300, 95910-A2750, or 95910-1H000, which are used in similar Kia and Hyundai vehicle models.

How do you recognize a defect in the 95910-A2320?

A defective 95910-A2320 airbag control unit primarily manifests as a permanently illuminated airbag warning light on the instrument cluster. Often, communication with a diagnostic tool is impossible, or specific error codes such as B1000 or B152700 (a serious internal fault) are logged.

The most noticeable sign is the airbag indicator light, which fails to turn off after the engine starts or re‑illuminates after about 30 seconds. This indicates a severe fault in the restraint system requiring immediate inspection.

Another clear symptom is when a workshop cannot establish communication between the diagnostic tool and the airbag control unit. In some cases, the paradoxical message “No error codes” appears even though the warning light is active.

During diagnostics at a specialized workshop, specific error codes are often read out, directly pointing to an internal fault in the control unit. Codes B1000 or B152700 are typical for the Kia cee'd JD model and confirm an irreparable, internal hardware failure.

In which vehicles is the 95910-A2320 installed?

The 95910-A2320 airbag control unit is mainly installed in Kia vehicles. Its primary application is in the Kia cee'd JD model range, produced from 2012 to 2018, including the Pro Cee'd and Sportswagon body styles. Similar control units can also be found in older cee'd generations.

At Airbag24, we repair the control unit with part number 95910-A2320 as well as compatible variants for the following models and series:

Kia: cee'd JD (Hatchback/Sportswagon, 2012–2018), Pro Cee'd JD (e.g., 1.6 CRDi), cee'd 1.4 CVVT. The control unit may also appear in older generations such as the cee'd ED or CD.

How is the 95910-A2320 repaired?

Professional repair at Airbag24 restores full functionality of the 95910-A2320 control unit cost-effectively. Following an initial inspection, stored crash data is erased, and defective components on the circuit board are replaced. Final tests ensure quality, and we provide a 12-month warranty on every repair.

Once the control unit arrives at Airbag24, technicians perform a comprehensive diagnosis to identify the exact cause of the fault. The main focus is on analyzing the memory modules and the power supply on the circuit board.

The core of the repair involves erasing the stored crash data and restoring the device to its factory settings. If hardware defects are present, affected components such as capacitors or processors are professionally replaced.

After repair, the control unit undergoes a comprehensive functional test to ensure it performs like a new part. An important note for workshops: following reinstallation, the repaired unit may need to be re‑coded to the vehicle to guarantee communication with all systems.

What shipping options does Airbag24 offer?

For repairing your control unit, Airbag24 provides flexible and convenient shipping options. You can return the defective part yourself at no cost or arrange for UPS pickup at your preferred location. For the return shipment, free standard and optional express services—including cash on delivery—are available.

For the outbound shipment, you have two choices: send us the securely packaged control unit yourself, or use our convenient UPS pickup service, which collects the package directly from your premises. Alternatively, you can drop off the unit in person at our facility.

Upon successful repair, the return shipment is provided free of charge via UPS Standard by default. If you require faster delivery, we also offer UPS Express shipping. Both options can, upon request, be arranged with cash on delivery.

Of course, you can also pick up your repaired control unit in person. Simply select the shipping method that best suits you when placing your order.