Airbag control unit with part number 95910-A2350

What does the airbag control unit 95910-A2350 do?

The airbag control unit 95910-A2350 coordinates the restraint system (SRS) in vehicles from Kia. It evaluates the messages from the crash sensors and decides in a crash, within milliseconds, which airbags and seatbelt pretensioners are triggered. After an accident it stores crash data and locks itself.

The device monitors the system continuously for faults. If it finds one, it records it in the fault memory and shows it via the airbag warning light, so that the driver can react.

The crash data is important for diagnosis, because it records the state after the event.

Why does the control unit 95910-A2350 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered; a normal diagnostic tool cannot erase it. Beside this, aged electronics, cold solder joints, moisture and corrosion on plug connections, and voltage spikes are possible.

Airbag24 erases this data in a targeted way during the repair.

The other causes build up over a longer period. Components age, solder joints can go cold, and moisture attacks contacts. Voltage spikes add further strain to the electronics, for example from a weak battery or an external jump start.

How can you tell that the 95910-A2350 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, and an error message appears in the instrument cluster. In addition, there is no connection to the diagnostic tool and the fault memory cannot be cleared.

With these signs, airbags and seatbelt pretensioners may not trigger in a crash.

Even a light that only comes on intermittently should be taken seriously and the fault memory read out.

Which vehicles is the 95910-A2350 fitted in?

The 95910-A2350 is fitted in these vehicles: Kia cee'd JD (2012-2018). The details refer to the current state of our data on this control unit.

The models we list for this control unit are shown below:

• Kia cee'd JD (2012-2018)

Comparing the part number on the label of the removed control unit with this page only ensures that it is the correct unit. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 95910-A2100, 95910-A2320, 95910-A2750.

How does the repair of the 95910-A2350 work?

Processing at Airbag24 usually takes 3–4 working days; this period covers only checking, repairing and testing. Your steps begin with reading out the fault memory, enclosing the log and disconnecting the battery.

Only then do you remove the control unit, create a repair order online and send in the well-packed unit.

Airbag24 checks it on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards your own unit comes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A2350 get to Airbag24?

You can send the unit as a parcel, or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Pack the control unit shockproof and enclose the printed repair order.