Airbag control unit with part number 95910-A2650

What does the airbag control unit 95910-A2650 do?

The airbag control unit 95910-A2650 coordinates the restraint system in the Kia. It measures what happens in an accident via the crash sensors and triggers airbags and seatbelt pretensioners within milliseconds.

During operation the unit checks the components of the system continuously. If it detects a fault, it shows this via the airbag warning light.

After an accident it records crash data and locks itself. This process is built into the unit.

Why does the control unit 95910-A2650 fail?

On the 95910-A2650, stored crash data after an accident is among the most common causes, even when no airbag has triggered. Aged components, cold solder joints, moisture and corrosion on connectors, and voltage spikes are also possible.

The crash data stays in the unit, because a normal diagnostic tool cannot erase it.

The remaining causes concern electronics, solder joints and connectors. Moisture and corrosion on the plugs, as well as voltage spikes from the vehicle electrical system, are typical here.

How can you tell that the 95910-A2650 is defective?

A fault on the 95910-A2650 becomes visible through the airbag warning light in the instrument cluster, which lights up permanently or intermittently. This includes a fault message in the instrument cluster, a diagnostic tool that cannot establish a connection, and a fault memory that you cannot clear.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

Do not dismiss the warning, so have it checked.

Which vehicles is the 95910-A2650 fitted in?

The 95910-A2650 is fitted in these vehicles: Kia cee'd JD (2012-2018).

The following list names the matching models.

• Kia cee'd JD (2012-2018)

Compare the part number on the unit with this page. This only confirms that it is the right unit. Whether the control unit is defective, or a connector or cable is the cause, is shown only by the read-out fault memory.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 95910-A2100, 95910-A2320, 95910-A2750.

How does the repair of the 95910-A2650 work?

For the 95910-A2650, you first have the fault memory read out and enclose the log with the unit. Next, disconnect the battery and only then remove the control unit. Airbag24 needs 3–4 working days as a rule for testing, repairing and checking.

Then create the repair order online and pack the unit well. Airbag24 tests it on the test bench, replaces defective components, erases stored crash data and carries out a function test.

Then your unit is sent back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A2650 get to Airbag24?

You send the control unit 95910-A2650 in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.