Airbag control unit with part number 95910-A5200

What does the airbag control unit 95910-A5200 do?

The airbag control unit 95910-A5200 coordinates the restraint system (SRS) for Hyundai. It reads the crash sensors, decides in an accident within milliseconds about triggering airbags and seatbelt pretensioners, and checks the system continuously.

If it detects a fault, it shows this via the airbag warning light in the instrument cluster. This tells you that something is wrong in the restraint system.

After an accident the unit stores crash data and locks itself. The evaluation of the sensors runs in the background without any action on your part.

Why does the control unit 95910-A5200 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A normal diagnostic tool cannot erase crash data. The data therefore remains stored in the control unit and appears with every read-out.

The remaining causes concern the electronics and the plug connections inside the unit. Whether one of them is present is determined only by the examination.

How can you tell that the 95910-A5200 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. An error message also appears in the instrument cluster, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared. Then airbags and seatbelt pretensioners may not trigger in an emergency.

The light reports a detected fault even when it lights up only intermittently. You should not ignore this indication.

A missing connection to the diagnostic tool may come from the control unit, but it does not have to. The read-out of the fault memory shows the cause.

Which vehicles is the 95910-A5200 fitted in?

The control unit 95910-A5200 is fitted in these vehicles: Hyundai Elantra MD.

The models recorded with this unit in our data are listed here.

• Hyundai Elantra MD

On the one hand, compare the part number on the label of the removed unit with this page, so that you have the right unit. On the other hand, have the fault memory read out before removal. Only this log shows whether the control unit is defective or a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-A5200 work?

First have the fault memory read out and enclose the log, then disconnect the battery. Only then remove the control unit, create a repair order online and send the unit in well packed.

This sequence is mandatory for safety reasons. Removal takes place only after the battery has been disconnected.

Airbag24 checks the unit on the test bench, replaces defective components and erases the crash data. A function test concludes the work. Processing at Airbag24 usually takes 3–4 working days, after which your own device goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A5200 get to Airbag24?

You send the control unit as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it to you by UPS.

Enclose the printed repair order in the parcel and pack the unit shock-proof.