Airbag control unit with part number 95910-A5700

What does the airbag control unit 95910-A5700 do?

The airbag control unit 95910-A5700 is the central control unit of the restraint system (SRS) in Hyundai. It processes the signals from the crash sensors, decides in a crash on the triggering of airbags and seatbelt pretensioners, and monitors the system continuously.

The unit stores faults it detects and displays them via the airbag warning light in the instrument cluster. In normal operation this goes unnoticed.

After a crash it secures crash data and locks itself.

Why does the control unit 95910-A5700 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data stays in the unit, because a standard diagnostic tool cannot remove it. Airbag24 erases it during the repair.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery

How can you tell that the 95910-A5700 is defective?

Signs are the airbag warning light, which lights up permanently or intermittently, a fault message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

• airbag warning light on permanently or intermittently
• fault message in the instrument cluster
• no connection to the diagnostic tool
• fault memory that cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Which vehicles is the 95910-A5700 fitted in?

The control unit 95910-A5700 is fitted in these vehicles: Hyundai Elantra MD.

This model is recorded for this part number:

• Hyundai Elantra MD

Comparing the part number on the label of the removed unit with this page only ensures that the right unit is present. Whether the control unit is defective, or a plug or cable is the cause, is shown only by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-3X100, 95910-A5150.

How does the repair of the 95910-A5700 work?

First have the fault memory read out and attach the log. Then disconnect the battery, and only afterwards remove the control unit. Next, create a repair order online and send the unit in well packed.

Airbag24 tests the unit on the test bench, repairs defective components, erases the crash data and runs a function test. Afterwards your own unit goes back to you.

Processing at Airbag24 usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A5700 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.