Airbag control unit with part number 95910-A6010

What does the airbag control unit 95910-A6010 do?

The airbag control unit 95910-A6010 controls the restraint system (SRS) in Hyundai vehicles. Based on the crash sensors, it decides within milliseconds in a crash which airbags and seatbelt pretensioners are triggered.

Between accidents, the unit monitors the entire system. If it reports a fault, the airbag warning light in the instrument cluster shows it.

After an accident, the control unit stores crash data and then locks itself.

Why does the control unit 95910-A6010 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed, and a normal diagnostic tool cannot erase it. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible causes.

Airbag24 erases the crash data during the repair, so it no longer remains in the unit.

Electronic components lose reliability over the years. Poorly connected solder joints and moisture on the plugs lead to faults, and voltage spikes, for example from a weak battery, put additional strain on the electronics.

How can you tell that the 95910-A6010 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message appears there. In addition, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

The warning light shows the defect before it matters in an emergency. Airbags and seatbelt pretensioners may then not deploy, which is why the check should be carried out promptly.

Which vehicles is the 95910-A6010 fitted in?

The control unit 95910-A6010 is fitted in these Hyundai vehicles: Hyundai i30 GD (2011-2015) and GD Facelift (2015-2017). Matching the part number shows whether the unit fits your own car.

The following list names vehicles in which this control unit occurs.

• Hyundai i30 GD (2011-2015)
• Hyundai i30 GD Facelift (2015-2017)

Compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. Have the fault memory read out before removal, because only the log shows whether the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A6000, 95910-A6300, 95910-S0000.

How does the repair of the 95910-A6010 work?

First have the fault memory read out and attach the log. Then disconnect the battery and afterwards remove the control unit. Create the repair order online and send in the well-packed unit. Airbag24 needs 3–4 working days for testing, repairing and checking, as a rule.

Airbag24 checks the unit on the test bench and repairs defective components. The crash data is then erased, and a function test is carried out. Afterwards your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A6010 get to Airbag24?

You send the unit as a parcel, or you book a UPS collection for an extra charge. The return after the repair is made by UPS.

Put the printed repair order into the parcel. The control unit must be packed shock-resistant.