Airbag control unit with part number 95910-A7130

What does the airbag control unit 95910-A7130 do?

The airbag control unit 95910-A7130 is the central control unit of the restraint system for Kia. It evaluates the crash sensors, decides on the triggering of airbags and seatbelt pretensioners in an accident, and monitors the system permanently.

During operation the control unit checks whether all connected components are working. If it detects a fault, it displays it via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-A7130 fail?

The most common cause at the 95910-A7130 is stored crash data after an accident, even if no airbag has deployed; a standard diagnostic tool cannot erase it. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data stays in the memory of the unit, and an erase attempt with the diagnostic tool does not help. The entries are only removed during the repair.

The other causes mainly concern the electronics and their connections. Components age, solder joints can turn cold, and moisture attacks the contacts. Voltage spikes, for example from a weak battery, additionally stress the circuit.

How can you tell that the 95910-A7130 is defective?

A defect in the 95910-A7130 shows itself through the airbag warning light in the instrument cluster, which lights up permanently or intermittently, and through further warning signs such as an error message. A diagnostic tool without a connection to the control unit is also a sign.

• Airbag warning light on permanently or intermittently
• Error message in the instrument cluster
• No connection established between the diagnostic tool and the control unit
• Fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may not deploy with such signs. Therefore have the cause checked promptly rather than ignoring the display.

Which vehicles is the 95910-A7130 fitted in?

The control unit 95910-A7130 is fitted in these vehicles: Kia Forte YD (2013-2018).

The assignment to this part number can be found in the overview below.

• Kia Forte YD (2013-2018)

Comparing the part number on the label of the removed unit with this page only shows that it is the right unit. Having the fault memory read out provides the clarification of whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 1Q959-10000, 95910-1M100, 95910-1M450, 95910-1M460, 95910-1Q000, 95910-B0100.

How does the repair of the 95910-A7130 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the 95910-A7130. Create the repair order online and send the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the control unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards you receive your own unit back.

The 3–4 working days apply only to the checking, repairing and testing at Airbag24. They do not cover your steps or the shipping.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A7130 get to Airbag24?

You send the control unit 95910-A7130 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-resistant.