Airbag control unit with part number 95910-A9100

What does the airbag control unit 95910-A9100 do?

The airbag control unit 95910-A9100 is the main control unit of the SRS for Kia. It processes the measurements from the crash sensors and, in the event of an accident, decides within milliseconds whether airbags and seatbelt pretensioners are triggered.

It also monitors the system during operation and shows faults via the airbag warning light.

After an accident it locks itself and stores crash data.

Why does the control unit 95910-A9100 fail?

Crash data that remains in memory after an accident is the most common cause, even if no airbag was triggered. A normal diagnostic tool cannot erase it. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Airbag24 erases this crash data during the repair.

The other causes concern the electronics and their connections: components age, solder joints can be cold, and moisture attacks plug contacts. Voltage spikes, for example from a weak battery or a jump start, additionally stress the circuit.

How can you tell that the 95910-A9100 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently and is therefore the first sign. In addition there is an error message in the instrument cluster, a diagnostic tool without connection to the control unit, or a fault memory that cannot be cleared.

In an emergency the airbags and seatbelt pretensioners may not trigger, so the light deserves full attention.

Plugs, cables or the power supply can also be the cause if the diagnostic tool gets no contact; which cause applies is shown only by the readout.

Which vehicles is the 95910-A9100 fitted in?

The control unit 95910-A9100 is fitted in these vehicles: Kia Sedona YP (2015-2020). Airbag24 assigns these vehicles to this part number.

The assigned vehicles are listed below.

• Kia Sedona YP (2015-2020)

Before removal, read the part number from the label and compare it with this page. This ensures that you have the right unit. The fault memory must be read out first, however, because only the result shows whether the control unit is defective or whether a plug or cable is behind it.

For the same vehicles, we also repair control units with the part numbers 95910-A9000, 95910-A9050, 95910-A9200, 95910-A9300, 95910-A9400, 95910-A9500.

How does the repair of the 95910-A9100 work?

The fault memory readout comes first, and the log is attached. Then you disconnect the battery and only after that remove the control unit 95910-A9100. Afterwards Airbag24 takes over the inspection, repairs defective components, erases the crash data and carries out a function test.

The sequence protects safety: the readout records the condition, and the disconnected battery makes removal harmless. You create the repair order online before sending in the well-packed unit.

Processing at Airbag24 usually takes 3–4 working days. Your own unit is returned afterwards.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required. Our repairs come with 2 years' statutory liability for defects.

How does the control unit 95910-A9100 get to Airbag24?

You pack the unit and send it as a parcel, or you book a UPS collection for an extra charge. Airbag24 returns it to you by UPS after the repair.

Pack the unit shock-proof and place the printed repair order in the parcel.