Airbag control unit with part number 95910-A9200

What does the airbag control unit 95910-A9200 do?

The airbag control unit 95910-A9200 is the control unit of the restraint system (SRS) in Kia. In an accident it evaluates the sensor signals and determines which airbags and seatbelt pretensioners are triggered.

In everyday use it monitors the function of the system without interruption. It shows any faults it finds via the airbag warning light, so that you can respond.

If an accident has happened, the unit stores crash data and then locks itself. This state is part of the protective concept of the restraint system and is not meant as a fault.

Why does the control unit 95910-A9200 fail?

The most common cause is crash data from the memory, even if no airbag has deployed. Other causes are ageing electronics, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data cannot be removed with an ordinary diagnostic tool. The unit keeps the entry, and the fault remains in the system until the data is removed during the repair.

The other causes concern contacts and electronics inside the unit. Weak batteries or jump-starting can produce voltage spikes that stress the electronics. At Airbag24 the crash data is erased and the other findings are checked.

How can you tell that the 95910-A9200 is defective?

The airbag warning light stays on permanently or lights up intermittently. In addition, an error message appears, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may therefore not deploy.

• Airbag warning light on permanently or intermittently
• Error message in the instrument cluster
• No connection between the diagnostic tool and the control unit
• Fault memory cannot be cleared

Any single one of these signs justifies an inspection, so you do not need to wait for all of them.

Which vehicles is the 95910-A9200 fitted in?

The airbag control unit 95910-A9200 is fitted in these vehicles: Kia Sedona YP (2015-2020). Comparing the part number only confirms the right unit; whether it is defective is shown only by the fault memory.

The list covers these models, which we have on record for this part number:

• Kia Sedona YP (2015-2020)

Compare the part number on the label of your removed unit with this page. Also have the fault memory read out in advance, because only that shows whether the control unit or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A9000, 95910-A9050, 95910-A9100, 95910-A9300, 95910-A9400, 95910-A9500.

How does the repair of the 95910-A9200 work?

First have the fault memory read out and enclose the log; then disconnect the battery, and only after that remove the control unit. Next create a repair order online and send in the unit well packed. Airbag24 usually needs 3–4 working days for inspection, repair and function test.

The Airbag24 workshop inspects the unit on the test bench and replaces defective components. Afterwards the stored crash data is erased and a function test is carried out.

After the repair, your unit comes back to you repaired.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A9200 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns the control unit by UPS.

Print out the repair order and enclose it with the parcel. Pack the unit shockproof before you hand it over.