Airbag control unit with part number 95910-A9300

What does the airbag control unit 95910-A9300 do?

The airbag control unit 95910-A9300 controls the restraint system (SRS) of Kia. It evaluates the signals from the crash sensors, decides on triggering within milliseconds in an emergency, and monitors the system permanently.

If the monitoring finds a fault, the unit stores it in memory and indicates it via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-A9300 fail?

Most often, crash data stored after an accident cause problems, even without an airbag deployment. A standard diagnostic tool cannot erase them. Other causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

This data stays stored in the unit, and a standard reader cannot reach it. Other causes that come into consideration are:

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

The test on the test bench shows which cause applies.

How can you tell that the 95910-A9300 is defective?

The airbag warning light lights up permanently or intermittently, an error message appears in the instrument cluster, the diagnostic tool does not connect to the control unit, and the fault memory cannot be cleared.

This display is part of everyday driving and is not a random finding. It is the sign that the restraint system must be checked.

If the connection to the diagnostic tool fails, nobody can read the memory, and the cause remains unknown.

In an emergency, the airbags and seatbelt pretensioners may not trigger as intended. This risk is the reason the warning must be taken seriously.

Which vehicles is the 95910-A9300 fitted in?

The control unit 95910-A9300 is in use in these vehicles: Kia Sedona YP (2015-2020).

The details come from the assignment to this part number. The list of recorded vehicles follows:

• Kia Sedona YP (2015-2020)

Comparing the part number on the label of the removed unit with this page is a sensible step, but it only confirms identity. Whether the control unit is defective or a plug or cable causes the fault is shown only by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-A9000, 95910-A9050, 95910-A9100, 95910-A9200, 95910-A9400, 95910-A9500.

How does the repair of the 95910-A9300 work?

First have the fault memory read out, enclose the log and disconnect the battery, then remove the control unit. Next, create a repair order online and pack the unit carefully for posting. Airbag24 checks it, replaces defective components, erases the crash data and carries out a function test.

At Airbag24, the unit goes onto the test bench. Airbag24 usually estimates 3–4 working days for this.

The sequence is binding, because the control unit can only be removed safely with the battery disconnected. Afterwards, your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A9300 get to Airbag24?

You decide the route to Airbag24 yourself: as a parcel or by UPS collection for an extra charge. Airbag24 sends the unit back by UPS.

The printed repair order belongs in the parcel, and the control unit is packed shockproof.