Airbag control unit with part number 95910-A9400

What does the airbag control unit 95910-A9400 do?

The airbag control unit 95910-A9400 belongs to the restraint system (SRS) of Kia. It checks the data from the crash sensors, decides in an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and keeps an eye on the system.

The unit monitors the system continuously and detects its own faults. It stores such faults in memory and shows them via the airbag warning light in the dashboard.

After an accident, the control unit stores crash data and locks itself. This is an important finding for the later repair.

Why does the control unit 95910-A9400 fail?

The most common cause of the 95910-A9400 is crash data stored after an accident, even if no airbag was triggered. In addition there are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, for example from a weak battery or a jump start.

The crash data remain in memory, and a standard diagnostic tool cannot remove them. The entry therefore stays in place even if the unit has already been read out.

Over time, components age, solder joints become brittle and moisture attacks the plug connectors. These gradual processes often only lead to noticeable symptoms late.

How can you tell that the 95910-A9400 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently on the 95910-A9400. Accompanying this, a fault message appears, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

The warning light is the clearest sign of a fault. It becomes active as soon as the control unit detects a fault and should not be ignored.

As long as the fault persists, airbags and seatbelt pretensioners may fail to trigger in an emergency. A prompt diagnosis is therefore sensible.

Which vehicles is the 95910-A9400 fitted in?

The 95910-A9400 is fitted in these vehicles: Kia Sedona YP (2015-2020).

The list of assigned models follows directly below.

• Kia Sedona YP (2015-2020)

On the one hand, you should compare the part number on the label of the removed unit with this page. This comparison only confirms that the unit is the right one. On the other hand, it is advisable to have the fault memory read out beforehand, because only this result shows whether the control unit is the cause or whether a plug or cable triggers the fault.

For the same vehicles, we also repair control units with the part numbers 95910-A9000, 95910-A9050, 95910-A9100, 95910-A9200, 95910-A9300, 95910-A9500.

How does the repair of the 95910-A9400 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Afterwards create a repair order online and pack the unit well for shipping. At Airbag24, processing usually takes 3–4 working days.

This sequence protects you during removal and must be followed.

Airbag24 examines the unit sent in on the test bench, replaces defective components, deletes the stored crash data and carries out a functional test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A9400 get to Airbag24?

You send the 95910-A9400 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

Enclose the printed repair order and pack the unit shock-proof.