Airbag control unit with part number 95910-A9700

What does the airbag control unit 95910-A9700 do?

The airbag control unit 95910-A9700 forms the central control of the SRS restraint system in Kia vehicles. It evaluates signals from the crash sensors, decides in an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and shows faults via the airbag warning light.

The system is checked continuously, and any deviations found are stored in the fault memory. There they are available for diagnosis.

After an accident, the control unit stores crash data and locks itself. The lock ends only with the repair.

Why does the control unit 95910-A9700 fail?

Most often it is the memory with crash data from an accident, even when the airbag has not triggered. This data cannot be erased with a normal diagnostic tool. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting.

Crash data stays in the memory, regardless of whether any damage is visible on the outside. The remaining causes can only be determined by a check.

Airbag24 examines them on the test bench and erases the crash data during the repair.

How can you tell that the 95910-A9700 is defective?

The airbag warning light, which stays on permanently or only at times, is the clearest sign. Fault messages in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared may also appear.

If the warning light is on, it shows the fault, even if nothing else seems unusual. Until the check, airbags and seatbelt pretensioners may fail to deploy in an emergency.

If the check is postponed, the fault remains, and so does the risk in an emergency.

In which vehicles is the 95910-A9700 fitted?

The control unit 95910-A9700 is fitted in these vehicles: Kia Carnival YP (2015-2020).

The vehicles assigned to this part number are shown in the overview below:

• Kia Carnival YP (2015-2020)

Comparing the part number on the label of the removed unit with this page only ensures that you have the right unit. The question of the defect is answered only by the fault memory. Have it read out before removal, and it will show whether the control unit or a plug or cable is causing the problem.

For the same vehicles, we also repair control units with the part numbers 95910-A9600, 95910-A9750.

How does the repair of the 95910-A9700 work?

First have the fault memory read out and enclose the report, then disconnect the battery and only afterwards remove the control unit. Next, create a repair order online and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.

The sequence serves safety during removal and is therefore binding. Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a function test.

Afterwards, your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-A9700 get to Airbag24?

You send the unit as a parcel or, for an extra charge, book a UPS collection. After the repair, it comes back to you by UPS.

The printed repair order lies in the parcel, and the unit is packed shock-proof.